User Manual BASS V-AMP LX1B/BASS V-AMP PRO LX1B PRO. The Ultimate Tone Toolbox for Bass/Acoustic/Electric Guitar and Keyboard Amp Modeling

Please download to get full document.

View again

of 23
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information Report
Category:

Crosswords

Published:

Views: 7 | Pages: 23

Extension: PDF | Download: 0

Share
Related documents
Description
User Manual BASS V-AMP LX1B/BASS V-AMP PRO LX1B PRO The Ultimate Tone Toolbox for Bass/Acoustic/Electric Guitar and Keyboard Amp Modeling 2 BASS V-AMP LX1B/BASS V-AMP PRO LX1B PRO User Manual Table of
Transcript
User Manual BASS V-AMP LX1B/BASS V-AMP PRO LX1B PRO The Ultimate Tone Toolbox for Bass/Acoustic/Electric Guitar and Keyboard Amp Modeling 2 BASS V-AMP LX1B/BASS V-AMP PRO LX1B PRO User Manual Table of Contents Important Safety Instructions... 3 Legal Disclaimer... 3 Limited Warranty Introduction Before you get started Control Elements Unit top/front side Rear panel of the BASS V-AMP PRO BASS V-AMP connectors (side) Application Examples/Operating Modes Selecting an operating mode (CONFIGURATION) Standard setup Recording situation Live setup with a connection to an external bass amplifier Presets of the BASS V-AMP/BASS V-AMP PRO Recalling presets Editing presets Saving user presets Overriding edits/ Restoring single factory presets Restoring all factory presets Amp/Speaker Simulation Amp descriptions Speaker descriptions Denoiser and compressor Effects Processor Pre-amp effects (OVER)DRIVE simulations Post-amp effects Tuner Tuning instruments Setting up the a reference tone Installation Rack mounting (BASS V-AMP PRO) Voltage (BASS V-AMP PRO) Audio connections MIDI connections AES/EBU and S/PDIF standards Specifications Appendix... 20 3 BASS V-AMP LX1B/BASS V-AMP PRO LX1B PRO User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼ TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel. This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual. Caution To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to qualified personnel. Caution To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus. Caution These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Use only attachments/accessories specified by the manufacturer. injury from tip-over. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection. 16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. LEGAL DISCLAIMER TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE MUSIC GROUP (MUSIC-GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSIC GROUP ACCEPTS NO LIABILITY FOR ANY LOSS WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN. COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS ONLY. FULLFILLERS AND RESELLERS ARE NOT AGENTS OF MUSIC GROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSIC GROUP BY ANY EXPRESS OR IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS WRITTEN PERMISSION OF MUSIC GROUP IP LTD. ALL RIGHTS RESERVED MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands LIMITED WARRANTY 1 Warranty (1) This limited warranty is valid only if you purchased the product from a MUSIC Group Authorized Reseller in the country of purchase. A list of authorized resellers can be found on BEHRINGER s website behringer. com under Where to Buy, or you can contact the MUSIC Group office closest to you. (2) MUSIC Group* warrants the mechanical and electronic components of this product to be free of defects in material and workmanship if used under normal operating conditions for a period of one (1) year from the original date of purchase (see the Limited Warranty terms in 4 below), unless a longer minimum warranty period is mandated by applicable local laws. If the product shows any defects within the specified warranty period and that defect is not excluded under 4, MUSIC Group shall, at its discretion, either replace or repair the product using suitable new or reconditioned product or parts. In case MUSIC Group decides to replace the entire product, this limited warranty shall apply to the replacement product for the remaining initial warranty period, i.e., one (1) year (or otherwise applicable minimum warranty period) from the date of purchase of the original product. (3) Upon validation of the warranty claim, the repaired or replacement product will be returned to the user freight prepaid by MUSIC Group. (4) Warranty claims other than those indicated above are expressly excluded. PLEASE RETAIN YOUR SALES RECEIPT. IT IS YOUR PROOF OF PURCHASE COVERING YOUR LIMITED WARRANTY. THIS LIMITED WARRANTY IS VOID WITHOUT SUCH PROOF OF PURCHASE. 2 Online registration Please do remember to register your new BEHRINGER equipment right after your purchase at behringer. com under Support and kindly read the terms and conditions of our limited warranty carefully. Registering your purchase and equipment with us helps us process your repair claims quicker and more efficiently. Thank you for your cooperation! 3 Return materials authorization (1) To obtain warranty service, please contact the retailer from whom the equipment was purchased. Should your MUSIC Group Authorized Reseller not be located in your vicinity, you may contact the MUSIC Group Authorized Fulfiller for your country listed under 4 BASS V-AMP LX1B/BASS V-AMP PRO LX1B PRO User Manual Support at behringer. com. If your country is not listed, please check if your problem can be dealt with by our Online Support which may also be found under Support at behringer. com. Alternatively, please submit an online warranty claim at behringer. com BEFORE returning the product. All inquiries must be accompanied by a description of the problem and the serial number of the product. After verifying the product s warranty eligibility with the original sales receipt, MUSIC Group will then issue a Return Materials Authorization ( RMA ) number. (2) Subsequently, the product must be returned in its original shipping carton, together with the return authorization number to the address indicated by MUSIC Group. (3) Shipments without freight prepaid will not be accepted. 4 Warranty Exclusions (1) This limited warranty does not cover consumable parts including, but not limited to, fuses and batteries. Where applicable, MUSIC Group warrants the valves or meters contained in the product to be free from defects in material and workmanship for a period of ninety (90) days from date of purchase. (2) This limited warranty does not cover the product if it has been electronically or mechanically modified in any way. If the product needs to be modified or adapted in order to comply with applicable technical or safety standards on a national or local level, in any country which is not the country for which the product was originally developed and manufactured, this modification/adaptation shall not be considered a defect in materials or workmanship. This limited warranty does not cover any such modification/adaptation, regardless of whether it was carried out properly or not. Under the terms of this limited warranty, MUSIC Group shall not be held responsible for any cost resulting from such a modification/adaptation. (3) This limited warranty covers only the product hardware. It does not cover technical assistance for hardware or software usage and it does not cover any software products whether or not contained in the product. Any such software is provided AS IS unless expressly provided for in any enclosed software limited warranty. (4) This limited warranty is invalid if the factory- applied serial number has been altered or removed from the product. (5) Free inspections and maintenance/repair work are expressly excluded from this limited warranty, in particular, if caused by improper handling of the product by the user. This also applies to defects caused by normal wear and tear, in particular, of faders, crossfaders, potentiometers, keys/buttons, guitar strings, illuminants and similar parts. (6) Damage/defects caused by the following conditions are not covered by this limited warranty: improper handling, neglect or failure to operate the unit in compliance with the instructions given in BEHRINGER user or service manuals; connection or operation of the unit in any way that does not comply with the technical or safety regulations applicable in the country where the product is used; damage/defects caused by acts of God/Nature (accident, fire, flood, etc) or any other condition that is beyond the control of MUSIC Group. (7) Any repair or opening of the unit carried out by unauthorized personnel (user included) will void the limited warranty. (8) If an inspection of the product by MUSIC Group shows that the defect in question is not covered by the limited warranty, the inspection costs are payable by the customer. (9) Products which do not meet the terms of this limited warranty will be repaired exclusively at the buyer s expense. MUSIC Group or its authorized service center will inform the buyer of any such circumstance. If the buyer fails to submit a written repair order within 6 weeks after notification, MUSIC Group will return the unit C.O.D. with a separate invoice for freight and packing. Such costs will also be invoiced separately when the buyer has sent in a written repair order. (10) MUSIC Group Authorized Resellers do not sell new products directly in online auctions. Purchases made through an online auction are on a buyer beware basis. Online auction confirmations or sales receipts are not accepted for warranty verification and MUSIC Group will not repair or replace any product purchased through an online auction. 5 Warranty transferability This limited warranty is extended exclusively to the original buyer (customer of authorized reseller) and is not transferable to anyone who may subsequently purchase this product. No other person (reseller, etc.) shall be entitled to give any warranty promise on behalf of MUSIC Group. 6 Claim for damage Subject only to the operation of mandatory applicable local laws, MUSIC Group shall have no liability to the buyer under this warranty for any consequential or indirect loss or damage of any kind. In no event shall the liability of MUSIC Group under this limited warranty exceed the invoiced value of the product. 7 Limitation of liability This limited warranty is the complete and exclusive warranty between you and MUSIC Group. It supersedes all other written or oral communications related to this product. MUSIC Group provides no other warranties for this product. 8 Other warranty rights and national law (1) This limited warranty does not exclude or limit the buyer s statutory rights as a consumer in any way. (2) The limited warranty regulations mentioned herein are applicable unless they constitute an infringement of applicable mandatory local laws. (3) This warranty does not detract from the seller s obligations in regard to any lack of conformity of the product and any hidden defect. 9 Amendment Warranty service conditions are subject to change without notice. For the latest warranty terms and conditions and additional information regarding MUSIC Group s limited warranty, please see complete details online at behringer. com. * MUSIC Group Macao Commercial Offshore Limited of Rue de Pequim No. 202-A, Macau Finance Centre 9/J, Macau, including all MUSIC Group companies 5 BASS V-AMP LX1B/BASS V-AMP PRO LX1B PRO User Manual 1. Introduction Congratulations! By purchasing the BASS V-AMP/BASS V-AMP PRO, you have selected a modern virtual bass amplifier that sets new standards in the world of bass preamps. Our primary goal was to achieve the classic sound of bass amps by using Physical Modeling and implementing the newest DSP effects. Following the tremendous success of our V-AMP and its successor V-AMP 2, with the BASS V-AMP/BASS V-AMP PRO we are finally able to offer bass players the same diversity of sound. However, we went a step further and expanded the concept to include items of interest to keyboarders and electric/acoustic guitar players. Those who have already used the V-AMP or the V-AMP 2 will appreciate the BASS V-AMP/ BASS V-AMP PRO as a terrific improvement. We wanted to create two devices that would stir conversations in years to come: the BASS V-AMP/BASS V-AMP PRO is universally usable and offers authentic amp and even speaker sounds all this without having to transport heavy equipment! Additionally, the most modern multi-effects processors assure unprecedented tonal freedom. In short, the BASS V-AMP/BASS V-AMP PRO gives you a sound machine sporting the hottest features of the day. Future EPROM updates will make sure your BASS V-AMP/BASS V-AMP PRO always has the latest software and features. BEHRINGER is a company in the field of professional audio studio technology. We have been successfully developing products for live and studio applications for years. Among those are microphones and 19 gear of all kinds (compressors, enhancers, noise gates, tube processors, headphone amplifiers, digital effects units etc.), monitoring and PA loudspeakers as well as professional live and recording mixing consoles. Our entire technical know-how has gone into creating your BASS V-AMP/BASS V-AMP PRO. To top it all, we worked together with professional bass players, whose sound suggestions led to the creation of original artist presets. Just a single glance at the separate preset sheet will be enough to completely amaze you. Flexibility is what matters most in the music industry. Bass players should be able to offer a wide array of different sounds, and should also be able to temporarily adjust to the demands of home recording, studio and live applications. Bulky amp combinations are out of sync with today s times precisely because of this reason. The BASS V-AMP/BASS V-AMP PRO offers you a maximum set of features in a compact unit that can be figured out in no time. But enough talking: Nothing will convince you more than the shear joy of what you will hear and feel the first time you play with your BASS V-AMP/BASS V-AMP PRO. You will experience a latest-generation virtual bass amplifier with fascinating features: Extreme sound variety and flexible output routing options for bass players Multi effects, amp and loudspeaker simulations for keyboard players Remarkably clean, high-gain sound and acoustic simulations for electric guitars Sound enhancer for acoustic guitar sound pickup Uncompromising loop/sampler function, super-phat analog bass synth and the best distortion pedal simulations. 1.1 Before you get started The BASS V-AMP/BASS V-AMP PRO was carefully packed at the assembly plant to assure its secure transport. Should the condition of the cardboard box suggest that damage may have taken place, please inspect the unit immediately and look for physical indications of damage. Damaged units should NEVER be sent directly to us. Please inform the dealer from whom you acquired the unit immediately as well as the transportation company from which you took delivery. Otherwise, all claims for replacement/repair may be rendered invalid. Please make sure the unit is provided with sufficient ventilation, and never place the BASS V-AMP/BASS V-AMP PRO on top of an amplifier or in the vicinity of a heater to avoid the risk of overheating. Before plugging the unit into a power socket, please make sure you have selected the correct voltage! Power is supplied via the cable included with the unit. All requiered safety precautions have been adhered to. When you hook up your BASS V-AMP/ BASS V-AMP PRO to the mains, the unit is automatically turned on. Please make sure that the unit is grounded at all times. For your own protection, you should never tamper with the grounding of the cable or the unit itself. MIDI connections (IN, OUT/THRU) use standard DIN plug-in connectors. Data transfer takes place via the dry-contact optical couplers. Additional information can be found in chapter 8 ( INSTALLATION ) Online registration Please register your new BEHRINGER equipment right after your purchase by visiting and read the terms and conditions of our warranty carefully. Should your BEHRINGER product malfunction, it is our intention to have it repaired as quickly as possible. To arrange for warranty service, please contact the BEHRINGER retailer from whom the equipment was purchased. Should your BEHRINGER dealer not be located in your vicinity, you may directly contact one of our subsidiaries. Corresponding contact information is included in the original equipment packaging (Global Contact Information/European Contact Information). Should your country not be listed, please contact the distributor nearest you. A list of distributors can be found in the support area of our website (http://behringer.com). Registering your purchase and equipment with us helps us process your repair claims more quickly and efficiently. Thank you for your cooperation! 2. Control Elements An illustration of all control elements is located on the separate sheet included with this user s manual. The controls on both devices are numbered the same way. How the two versions differ is clearly marked by using the designations BASS V-AMP only or BASS V-AMP PRO only. Connections on both versions are covered in a separate chapter in this user s manual. 2.1 Unit top/front side (1) Turn your BASS V-AMP PRO on using the POWER switch. The POWER switch should always be in the Off position (dep
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks