PIP STS03600 (Nonshrink Cementitous Grout Specification)

Please download to get full document.

View again

of 8
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information Report
Category:

Documents

Published:

Views: 87 | Pages: 8

Extension: PDF | Download: 5

Share
Related documents
Description
Nonshrink Cementitous Grout Specification
Tags
Transcript
  COMPLETE REVISION June 2002  Process Industry PracticesStructural PIP STS03600Nonshrink Cementitious Grout Specification  PURPOSE AND USE OF PROCESS INDUSTRY PRACTICESIn an effort to minimize the cost of process industry facilities, this Practice has been prepared from the technical requirements in the existing standards of major industrial users, contractors, or standards organizations. By harmonizing thesetechnical requirements into a single set of Practices, administrative, application, andengineering costs to both the purchaser and the manufacturer should be reduced. Whilethis Practice is expected to incorporate the majority of requirements of most users,individual applications may involve requirements that will be appended to and take precedence over this Practice. Determinations concerning fitness for purpose and particular matters or application of the Practice to particular project or engineeringsituations should not be made solely on information contained in these materials. Theuse of trade names from time to time should not be viewed as an expression of  preference but rather recognized as normal usage in the trade. Other brands having thesame specifications are equally correct and may be substituted for those named. AllPractices or guidelines are intended to be consistent with applicable laws andregulations including OSHA requirements. To the extent these Practices or guidelinesshould conflict with OSHA or other applicable laws or regulations, such laws or regulations must be followed. Consult an appropriate professional before applying or acting on any material contained in or suggested by the Practice.This Practice is subject to revision at any time by the responsible Function Team andwill be reviewed every 5 years. This Practice will be revised, reaffirmed, or withdrawn.Information on whether this Practice has been revised may be found at www.pip.org.© Process Industry Practices (PIP), Construction Industry Institute, TheUniversity of Texas at Austin, 3925 West Braker Lane (R4500), Austin,Texas 78759. PIP member companies and subscribers may copy this Practicefor their internal use. Changes, overlays, addenda, or modifications of anykind are not permitted within any PIP Practice without the express writtenauthorization of PIP.PIP will not consider requests for interpretations (inquiries) for this Practice. PRINTING HISTORY  November 1996Issued  June 2002Complete Revision Not printed with State funds  COMPLETE REVISION June 2002 Process Industry PracticesPage 1 of 6  Process Industry PracticesStructural PIP STS03600Cementitious Grout Specification Table of Contents1. Introduction..................................2 1.1 Purpose .............................................21.2 Scope.................................................2 2. References ...................................2 2.1 Process Industry Practices................22.2 Industry Codes and Standards..........22.3 Government Regulations...................2 3. Definitions....................................34. General.........................................3 4.1 Field Quality Control of Grout............34.2 Testing...............................................44.3 Submittals..........................................44.4 Safety.................................................4 5. Products.......................................4 5.1 Materials............................................45.2 Mixing Water......................................5 6. Execution......................................5 6.1 Application.........................................56.2 Preparation........................................56.3 Installation of Grout............................6  PIP STS03600   COMPLETE REVISION Cementitious Grout SpecificationJune 2002 Page 2 of 6Process Industry Practices 1. Introduction 1.1 Purpose This Practice provides the contractor with a specification for the supply andinstallation of “non-shrink” cementitious grout for equipment and structural column base plates. Refer to  PIP STS03601  for epoxy grout specifications. 1.2 Scope 1.2.1The contractor shall furnish all equipment, materials, labor, and supervisionand shall perform all operations necessary for the formwork, proper mixing, placing, finishing, and curing of “nonshrink” cementitious grout, hereafter referred to as grout, where indicated by the contract documents.1.2.2Any conflicts or inconsistencies between this Practice, the design drawings,the grout manufacturer’s specifications and recommendations, or other contract documents shall be brought to the attention of the buyer for resolution before the work begins.This document is a complete revision of PIP STS03600 - Cementitious Grout Specification,  and therefore revision markings are not provided. 2. References When adopted in this Practice or in the contract documents, the latest edition of thefollowing codes, standards, specifications, and references in effect on the date of contractaward shall be used, except as otherwise specified. Short titles will be used herein whenappropriate. 2.1 Process Industry Practices (PIP)  –PIP STS03001 -  Plain and Reinforced Concrete Specification  –PIP STS03601 -  Epoxy Grout Specification  –PIP/API REIE686 -  Recommended Practices for Machinery Installation and  Installation Design 2.2 Industry Codes and Standards ã   American Society for Testing and Materials (ASTM) –ASTM C109/C109M - Standard Test Method for Compressive Strength of  Hydraulic-Cement Mortars (Using 2-in. or 50-mm Cube Specimens)  –ASTM C1107 - Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink) 2.3 Government Regulations Federal standards and instructions of the U. S. Occupational Safety and HealthAdministration (OSHA), including any additional requirements by state or local
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks