Microsemi Adaptec RAID Controller Command Line Utility

Please download to get full document.

View again

of 70
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information Report
Category:

Others

Published:

Views: 37 | Pages: 70

Extension: PDF | Download: 0

Share
Related documents
Description
. User's Guide Microsemi Adaptec RAID Controller Command Line Utility Released April 2016 Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA USA Within the USA: +1 (800) Outside
Transcript
. User's Guide Microsemi Adaptec RAID Controller Command Line Utility Released April 2016 Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA USA Within the USA: +1 (800) Outside the USA: +1 (949) Sales: +1 (949) Fax: +1 (949) Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are trademarks of Microsemi Corporation. All other trademarks and service marks are the property of their respective owners. Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for communications, defense and security, aerospace, and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs, and ASICs; power management products; timing and synchronization devices and precise time solutions; voice processing devices; RF solutions; discrete components; enterprise storage and communications solutions; security technologies and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, California and has approximately 4,800 employees world-wide. Learn more at Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does Microsemi assume any liability whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction with mission-critical equipment or applications. Any performance specifications are believed to be reliable but are not verified, and Buyer must conduct and complete all performance and other testing of the products, alone and together with, or installed in, any end-products. Buyer shall not rely on any data and performance specifications or parameters provided by Microsemi. It is the Buyer's responsibility to independently determine suitability of any products and to test and verify the same. The information provided by Microsemi hereunder is provided as is, where is and with all faults, and the entire risk associated with such information is entirely with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights, whether with regard to such information itself or anything described by such information. Information provided in this document is proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products and services at any time without notice., April 2016 Revision History Issue 1 Issue Date April 2016 Details of Change Add new commands; TASK uninit ALL; new GETCONFIG component properties; Logical Drive, HDD, and Backup System Status and Error Conditions., Issue 3 Contents Microsemi Adaptec Product Support...7 Software License Agreement Getting Started with the Command Line Utility Installing the Command Line Utility Downloading the Installation Packages Installing on Windows Installing on Red Hat, Cent OS, SuSE, or Fedora Linux Installing on Debian or Ubuntu Linux Installing on Solaris Installing on FreeBSD Installing on VMware Installing on Citrix XenServer Installing on a Guest Operating System Installing on a Windows Guest OS Installing on a Linux Guest OS Starting the Command Line Utility Using the Command Line Utility ARCCONF Commands arcconf atapassword arcconf backupunit arcconf consistencycheck arcconf copyback arcconf cpld arcconf create arcconf delete arcconf driverupdate arcconf errortunable arcconf expanderlist arcconf expanderupgrade arcconf failover arcconf getconfig arcconf getexception arcconf getlogs arcconf getperform arcconf getsmartstats arcconf getstatus arcconf getversion arcconf identify arcconf imageupdate arcconf key arcconf list arcconf modify arcconf phyerrorlog arcconf playconfig arcconf preservecache arcconf rescan 2.30 arcconf resetstatisticscounters arcconf romupdate arcconf saveconfig arcconf savesupportarchive arcconf seeprom arcconf setalarm arcconf setbiosparams arcconf setboot arcconf setcache arcconf setconfig arcconf setconnectormode arcconf setcontrollermode arcconf setcustommode arcconf setmaxcache arcconf setname arcconf setncq arcconf setperform arcconf setphy arcconf setpower arcconf setpriority arcconf setstate arcconf setstatsdatacollection arcconf setvmcredential arcconf smp arcconf task arcconf uninit arcconf verifywrite...57 Appendix A getconfig Output Summary...59 Appendix B Logical Drive, HDD, and Flash Backup System Status and Error Conditions List of Tables Table 1 ARCCONF Batch Environments...16 Table 2 ARCCONF Commands...16 Table 3 getconfig output summary Microsemi Adaptec Product Support If you have questions about installing or using your Microsemi Adaptec product, check this document first you will find answers to most of your questions. If you need further assistance, use the support options listed below. To expedite your service, have your computer in front of you. Note: Please visit the Support section of for the most up to date contact information. Self Help and Support in English Visit our Web site at Search the Adaptec Support Knowledgebase (ASK) at ask.adaptec.com for articles, troubleshooting tips, and frequently asked questions for your product. For support via , submit your question at ask.adaptec.com. To contact Technical Support, visit our product support site at start.adaptec.com and click on Contact Support for options. Technische Informationen und Support in Deutsch Besuchen Sie unsere Webseite Suchen Sie in der Adaptec Support Knowledgebase (ASK) unter ask-de.adaptec.com nach Artikeln, Tipps zur Fehlerbehebung und häufig gestellten Fragen zu Ihrem Produkt. Support per erhalten Sie unter ask-de.adaptec.com. Um den Technischen Support zu kontaktieren, besuchen Sie uns bitte unter start.adaptec.com und klicken Sie auf Support kontaktieren, für Auswahlmöglichkeiten. Техническая поддержка и информация на русском языке Посещаете наш сайт База знаний Adaptec (ASK) на сайте ask-ru.adaptec.com ask-ru.adaptec.com статьи, советы по устранению неисправностей и часто задаваемые вопросы о Вашем продукте. Для поддержки по электронной почте отправьте Ваш запрос на сайте ask-ru.adaptec.com Для обращения в службу Технической Поддержки, пожалуйста, посетите наш web сайт start.adaptec.com и используйте ссылку Contact Support . 日本語での技術情報とサポート 弊社のウェブサイト をご覧ください ask.adaptec.co.jp の Adaptec Support Knowledgebase (ASK) で お使いの製品の情報トラブルシューティングのヒント よくある質問を検索してください E メールでのサポートには ask.adaptec.co.jp から質問を送ってください テクニカルサポートへコンタクトするには 弊社ウェブサイト start.adaptec.com をご覧になり Contact Support をクリックして下さい 7 Software License Agreement PLEASE READ CAREFULLY: THE USE OF THIS SOFTWARE IS SUBJECT TO THE SOFTWARE LICENSE TERMS OF MICROSEMI, INC. AND OTHER LICENSORS WHOSE SOFTWARE MAY BE BUNDLED WITH THIS PRODUCT. BY YOUR USE OF THE SOFTWARE INCLUDED WITH THIS PRODUCT YOU AGREE TO THE LICENSE TERMS REQUIRED BY THE LICENSOR OF THAT SOFTWARE, AS SET FORTH DURING THE INSTALLATION PROCESS. IF YOU DO NOT AGREE TO THE LICENSE TERMS APPLICABLE TO THE SOFTWARE, YOU MAY RETURN THE ENTIRE UNUSED PRODUCT FOR A FULL REFUND. In return for acquiring a license to use the Microsemi software, which may include software from third party licensors and patches made available by Microsemi ( Software ), and the related documentation, you agree to the following terms and conditions: 1. License. This Agreement grants you, the Licensee, a license to: a. Use the Software on a single computer system, which is not intended for use by more than five (5) users; and: b. Make one copy of the Software in machine readable form solely for back-up purposes, provided you reproduce Microsemi's copyright proprietary legends. Notwithstanding the foregoing, the Software may be used on the home, laptop or other secondary computer of the principal user of the Software, and an additional copy of the Software may be made to support such use. As used in this license, the Software is in use when it is either loaded into RAM or installed on a hard disk or other permanent memory device. The Software may be in use on only one computer at any given time. (Different license terms and fees are applicable for networked or multiple user applications.) As a specific condition of this license, you agree to use the Software in compliance with all applicable laws, including copyright laws, and that you will not copy, transmit, perform or distribute any audio or other content using the Software without obtaining all necessary licenses or permissions from the owner of the content. 2. Restrictions. You may not distribute copies of the Software to others or electronically transfer the Software from one computer to another over a network. You may not post or otherwise make available the Software, or any portion thereof, in any form, on the Internet. You may not use the Software in a computer service business, including in time sharing applications. The Software contains trade secrets and, in order to protect them, you may not decompile, reverse engineer, disassemble, or otherwise reduce the Software to a human-perceivable form. YOU MAY NOT MODIFY, ADAPT, TRANSLATE, RENT, LEASE, LOAN, RESELL FOR PROFIT, DISTRIBUTE, NETWORK OR CREATE DERIVATIVE WORKS BASED UPON THE SOFTWARE OR ANY PART THEREOF. 3. Ownership of Software. As Licensee, you own the media upon which the software is recorded or fixed, but Microsemi and its licensors retain title and ownership of the Software recorded on the original media and all subsequent copies of the Software, regardless of the form or media in which or on which the original and other copies may exist. This license is not a sale of the Software or any copy. 4. Confidentiality. You agree to maintain the Software in confidence and that you will not disclose the Software to any third party without the express written consent of Microsemi. You further agree to take all reasonable precautions to preclude access of unauthorized persons to the Software. 5. Term. This license is effective until January 1, 2045, unless terminated earlier. You may terminate the license at any time by destroying the Software (including the related documentation) together with all copies or modifications in any form. Microsemi will have the right to terminate our license immediately if you fail to comply with any term or condition of this Agreement. Upon any termination, including termination by you, you must destroy the Software (including the related documentation), together with all copies or modifications in any form. 8 6. Special Terms Applicable to Databases. Where a database is included with the Software, you acknowledge that it is licensed only in connection with the use of the Software to perform disc creation, and that the database and all data derived therefrom must be maintained in confidence in accordance with the provisions of Section 4. This license does not grant you any rights to distribute or disclose such database or data. 7. Limited Warranty. Microsemi and its Licensor warrant only that the media upon which the Software is furnished will be free from defects in material or workmanship under normal use and service for a period of thirty (30) days from the date of delivery to you. MICROSEMI AND ITS LICENSORS DO NOT AND CANNOT WARRANT THE PERFORMANCE OR RESULTS YOU MAY OBTAIN BY USING THE SOFTWARE OR DOCUMENTATION. THE FOREGOING STATES THE SOLE AND EXCLUSIVE REMEDIES MICROSEMI AND ITS LICENSORS WILL PROVIDE FOR BREACH OF WARRANTY. EXCEPT FOR THE FOREGOING LIMITED WARRANTY, MICROSEMI AND ITS LICENSORS MAKE NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED, AS TO NON-INFRINGEMENT OF THIRD PARTY RIGHTS, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow the exclusion of implied warranties or limitations on how long an implied warranty may last, so the above limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 8. The entire liability of Microsemi and its licensors, and your exclusive remedy for a breach of this warranty, shall be: a. The replacement of any media not meeting the above limited warranty which is returned to Microsemi; or: b. if Microsemi or its distributor is unable to deliver replacement media which is free from defects in materials or workmanship, you may terminate this Agreement by returning the Software and your money will be refunded. 9. Limitation of Liability. IN NO EVENT WILL MICROSEMI OR ITS LICENSORS BE LIABLE TO YOU FOR ANY INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES, INCLUDING ANY LOST PROFITS, LOST SAVINGS, OR LOSS OF DATA, EVEN IF MICROSEMI OR A LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY. Some states do not allow the exclusion or limitation of special, incidental, or consequential damages, so the above limitation or exclusion may not apply to you. 10. Export. You acknowledge that the laws and regulations of the United States and other countries may restrict the export and re-export of the Software. You agree that you will not export or re-export the Software or documentation in any form in violation of applicable United States and foreign law. 11. Government Restricted Rights. The Software is subject to restricted rights as follows. If the Software is acquired under the terms of a GSA contract: use, reproduction or disclosure is subject to the restrictions set forth in the applicable ADP Schedule contract. If the Software is acquired under the terms of a DoD or civilian agency contract, use, duplication or disclosure by the Government is subject to the restrictions of this Agreement in accordance with 48 C.F.R of the Federal Acquisition Regulations and its successors and 49 C.F.R of the DoD FAR Supplement and its successors. 12. General. You acknowledge that you have read this Agreement, understand it, and that by using the Software you agree to be bound by its terms and conditions. You further agree that it is the complete and exclusive statement of the agreement between Microsemi and you, and supersedes any proposal or prior agreement, oral or written, and any other communication between Microsemi and you relating to the subject matter of this Agreement. No additional or any different terms will be enforceable against Microsemi unless Microsemi gives its express consent, including an express waiver of the terms of this Agreement, in writing signed by an officer of Microsemi. You assume full responsibility for the use of the Software and agree to use the Software legally and responsibly. This Agreement shall be governed by California law, except as to copyright matters, which are covered by Federal law. This Agreement is deemed entered into at Sunnyvale, California by both parties. Should any provision of this Agreement be declared unenforceable in any jurisdiction, then such 9 provision shall be deemed severable from this Agreement and shall not affect the remainder hereof. All rights in the Software not specifically granted in this Agreement are reserved by Microsemi. Should you have any questions concerning this license, contact: Microsemi Corporation Legal Department One Enterprise Aliso Viejo, CA (949) Getting Started with the Command Line Utility 1 Getting Started with the Command Line Utility This chapter explains how your Microsemi Adaptec RAID controllers support the use of the ARCCONF command line utility. This utility allows you to: Create and delete logical drives Display and modify configuration settings Copy configurations from one computer to another Recover from a failed physical device and rebuild an affected logical drive Flash new firmware and BIOS onto the controller Enable the controller to check the removal and connection of any disk drives Provides access to the status and event logs of a controller Isolate problems and determine their causes 1.1 Installing the Command Line Utility You can install ARCCONF with the Microsemi Adaptec maxview Storage Manager application. If you prefer to install just the command line utility, without installing the maxview Storage Manager GUI, you can install just the ARCCONF executable for your operating system. Follow the instructions in this section to install ARCCONF on the supported operating systems with maxview Storage Manager. (For more information about maxview Storage Manager, see the maxview Storage Manager User's Guide.) Note: On FreeBSD systems, you must use ARCCONF to perform storage management tasks. FreeBSD does not support the maxview Storage Manager GUI. For more information, see Downloading the Installation Packages on page 11 and Installing on FreeBSD on page Downloading the Installation Packages Complete these steps to download the installation package for your operating system(s) from the Adaptec Web site: 1. Open a browser window, then type start.adaptec.com in the address bar. 2. Select your RAID controller family (Series 7, Series 8, and so on) and controller model. 3. Select Storage Manager Downloads, then select the appropriate installer package from the list; for instance, maxview Storage Manager for Windows x64 or maxview Storage Manager for Linux. Note: To install ARCCONF without the GUI, select Adaptec ARCCONF Command Line Utility from the list of installers. This package includes the ARCCONF executable for Windows, Linux, Solaris, and FreeBSD. 4. Click Download Now and accept the license agreement. 5. When the download completes, extract the contents of the installer archive file to a temporary location. If the archive includes installers for multiple operating system versions (VMware, for instance), each installer is stored in a separate folder, including one each for 32-bit and 64-bit operating systems. Note: If you are installing maxview Storage Manager and ARCCONF on a different machine for instance, you downloaded the Linux installer onto a Windows machine copy the installer from the download location to a temporary location on the target machine. Use whatever method you prefer to copy the file: USB flash drive; network transfer; Telnet/SSH; whatever is most convenient. 6. Continue with the installation instructions for your operating system. 11 Getting Started with the Command Line Utility Installing on Windows To install ARCCONF on Windows systems: 1. Open Windows Explorer or My Computer, then change to the directory where the Windows setup program is located (see Downloading the Installation Packages on page 11 for details). 2. Double-click the setup program for your operating system version: Options Windows 64-bit The Installation wizard opens. setup_asm_x64.exe 3. Click Next to begin the installation, click I accept..., then click Next. 4. Add the following configuration settings: a) CIM Server Port: b) Web Server Port: Click OK on the password verification window and on the CIM Server and Web Server port number verification window. 6. In the Features window, select GUI, Agent, and CLI Tools. Then click Next. 7. Follow the on-screen instructions to complete the installation Installing on Red Hat, Cent OS, SuSE, or Fedora Linux To install ARCCONF on Red Hat, Cent OS, SuSE, or Fedora Linux: 1. In a shell window, change to the directory where the Linux installer package is located (see Downloading the Installer Package on page 11 for details). 2. Run the.bin file for your operating system version: Options Linux 64-bit./StorMan-2.01.x86_64.bin 3. When prompted for configuration details, enter the following: Enter the CIM Server HTTP Port: [default:5988] When the installation completes a confirmation message is displayed Installing on Debian or Ubuntu Linux To install ARCCONF on Debian or Ubuntu Linux: 1. In a shell window, change to the directory where th
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks