9702_s13_ir_31

Please download to get full document.

View again

of 8
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information Report
Category:

Creative Writing

Published:

Views: 1 | Pages: 8

Extension: PDF | Download: 0

Share
Related documents
Description
UNIVERSITY OF CAMBRIDGE INTERNATIONAL EXAMINATIONS General Certificate of Education Advanced Subsidiary Level and Advanced Level PHYSICS 9702/31 Paper 3 Advanced…
Transcript
UNIVERSITY OF CAMBRIDGE INTERNATIONAL EXAMINATIONS General Certificate of Education Advanced Subsidiary Level and Advanced Level PHYSICS 9702/31 Paper 3 Advanced Practical Skills 1 May/June 2013 CONFIDENTIAL INSTRUCTIONS Great care should be taken to ensure that any confidential information given does not reach the * 7 2 9 5 5 3 5 5 3 0 * candidates either directly or indirectly. No access to the Question Paper is permitted in advance of the examination. If you have any problems or queries regarding these Instructions, please contact Cambridge by e-mail: info@cie.org.uk, by phone: +44 1223 553554, by fax: +44 1223 553558, stating the Centre number, the nature of the query and the syllabus number quoted above. This document consists of 8 printed pages. DC (LEG/SW) 63025/2 © UCLES 2013 [Turn over 2 Preparing apparatus These instructions detail the apparatus required for the experiments in the Question Paper. It is essential that absolute confidentiality is maintained in advance of the examination: the contents of these instructions must not be revealed either directly or indirectly to candidates. No access is permitted to the Question Paper in advance of the examination. If you have problems or queries regarding these instructions, please contact Cambridge: by e-mail: info@cie.org.uk, or by telephone: +44 1223 553554, or by fax: +44 1223 553558, stating the nature of the query and quoting the syllabus and paper numbers (9702/31). It is assumed that the ordinary apparatus of a Physics laboratory will be available. Number of sets of apparatus The number of sets of apparatus provided for each experiment should be 12 N, where N is the number of candidates taking the examination. There should, in addition, be a few spare sets of apparatus available in case problems arise during the examination. Organisation of the examination Candidates should be allowed access to the apparatus for each experiment for one hour only. After spending one hour on one experiment, candidates should change over to the other experiment. The order in which a candidate attempts the two experiments is immaterial. Assistance to Candidates Candidates should be informed that, if they find themselves in real difficulty, they may ask the Supervisor for practical assistance, but that the extent of this assistance will be reported to the Examiner, who may make a deduction of marks. Assistance should only be given: when it is asked for by a candidate, or as directed in the Notes sections of these instructions, or where apparatus is seen to have developed a fault. Assistance should be restricted to enabling candidates to make observations and measurements. Observations and measurements must not be made for candidates, and no help should be given with data analysis or evaluation. All assistance given to candidates must be reported on the Supervisor’s Report Form. Faulty apparatus In cases of faulty apparatus (not arising from a candidate’s mishandling) that prevent the required measurements being taken, the Supervisor may allow extra time to give the candidate a fair opportunity to perform the experiment as if the fault had not been present. The candidate should use a spare copy of the Question Paper when the fault has been rectified or when working with a second set of apparatus. Supervisor’s Report The Supervisor should complete the Supervisor’s Report Form on pages 7 and 8 and enclose it in the envelope containing the answers of the candidates. If more than one envelope is used, a copy of the report must be enclosed in each envelope. © UCLES 2013 9702/31/CI/M/J/13 3 Question 1 Apparatus requirements (per set of apparatus unless otherwise specified) Metre rule with a millimetre scale. Stand of height at least 60 cm. Clamp. Boss. Wooden strip of approximate dimensions 100 cm × 2 cm × 0.6 cm. See Note 1. Three loops of thin string. See Note 1. Rubber band of unstretched circumference approximately 20 cm, and maximum width 6 mm. Mass labelled M and an accompanying card. See Note 2. 10 g mass hanger with its value of mass clearly labelled. 50 g slotted mass and four 10 g slotted masses. It must be possible to fit the slotted masses onto the 10 g mass hanger. © UCLES 2013 9702/31/CI/M/J/13 [Turn over 4 Notes 1 The wooden strip should have two holes drilled in it as shown in Fig. 1.1. 40 cm 40 cm centre of gravity of the strip Fig. 1.1 The three loops of string should each be of approximate circumference 15 cm. Two of the loops should be tied through the holes in the strip as shown in Fig. 1.1. The third loop should be placed on the bench for use by the candidate. 2 The mass labelled M should have the same mass as the wooden strip to within 0.001 kg. This mass should consist of a mass hanger and sufficient slotted masses and modelling clay if necessary. This mass should be taped so that it cannot be changed by the candidate. The mass should be written to the nearest 0.001 kg on a card as shown in Fig. 1.2. M = .................... kg Fig. 1.2 3 The apparatus is to be laid out on the bench. If it is to be used by another candidate, then it should be dismantled and restored to its original state. Information required by Examiners Sample set of numerical results, clearly labelled “Supervisor’s Results” and obtained out of sight of the candidates. © UCLES 2013 9702/31/CI/M/J/13 5 Question 2 Apparatus requirements (per set of apparatus unless otherwise specified) Cylindrical wooden rod of approximate length 50 cm and approximate diameter 12 mm. See Note 1. Cylindrical wooden rod of approximate length 8 cm and approximate diameter 12 mm. See Note 1. Nail of approximate length 5 cm. See Note 1. String. See Note 1. 100 g mass hanger. Stand of height at least 60 cm with a flat base. Clamp. Boss. Stopwatch reading to 0.1 s or better. 180° protractor reading to the nearest degree or better. Metre rule with a millimetre scale. Bracket. See Note 2. Notes 1 The two wooden rods, nail and string should be assembled as shown in Fig. 2.1. flat head of nail knot wooden rod 4 cm 35 cm string 20 cm 7 cm wooden rod knot Fig. 2.1 The nail should be inserted centrally and firmly in one end of the longer wooden rod. Holes should be drilled through the wooden rods to enable the string to pass through. The knots should be large enough that they do not slip back through the holes when force is applied. © UCLES 2013 9702/31/CI/M/J/13 [Turn over 6 2 The bracket should be made from stiff card, wood or metal and have approximate dimensions as shown in Fig. 2.2. 2 cm 2 cm 3 cm Fig. 2.2 3 The apparatus is to be laid out on the bench. If it is to be used by another candidate, then it should be dismantled and restored to its original state. Information required by Examiners Sample set of numerical results, clearly labelled “Supervisor’s Results” and obtained out of sight of the candidates. Permission to reproduce items where third-party owned material protected by copyright is included has been sought and cleared where possible. Every reasonable effort has been made by the publisher (UCLES) to trace copyright holders, but if any items requiring clearance have unwittingly been included, the publisher will be pleased to make amends at the earliest possible opportunity. University of Cambridge International Examinations is part of the Cambridge Assessment Group. Cambridge Assessment is the brand name of University of Cambridge Local Examinations Syndicate (UCLES), which is itself a department of the University of Cambridge. © UCLES 2013 9702/31/CI/M/J/13 7 9702/31 This form should be completed and sent to the Examiner with the scripts. SUPERVISOR’S REPORT FORM General Certificate of Education Advanced Subsidiary Level and Advanced Level May/June Session 2013 The Supervisor’s Report should give full details of: (a) any help given to a candidate (including the nature of the help given and the name and candidate number of the candidate); (b) any cases of faulty apparatus (including the nature of the problem, the action taken to rectify it, any additional time allowed, and the name and candidate number of the candidate); (c) any accidents that occurred during the examination; (d) any other difficulties experienced by candidates, or any other information that is likely to assist the Examiner, especially if this information cannot be discovered in the scripts. Cases of individual hardship, such as illness, bereavement or disability, should be reported direct to Cambridge on the normal Special Consideration form. Information required by Examiners For each question, please enclose a sample set of numerical results, obtained out of sight of the candidates and clearly labelled “Supervisor’s Results”. Supervisor’s Report  © UCLES 2013 9702/31/CI/M/J/13 [Turn over 8 Supervisor’s Report (continued) Declaration (to be signed by the Supervisor) The preparation of this practical examination has been carried out so as to maintain fully the security of the examination. Signed ......................................................... Name ........................................................... Centre number ............................................. Name of Centre .......................................................................................................................................  © UCLES 2013 9702/31/CI/M/J/13
Recommended
9702_w16_ir_31

9702_w16_ir_31

8 pages

9702_s10_ir_31

9702_s10_ir_31

8 pages

9702_w15_ir_31

9702_w15_ir_31

8 pages

9702_w13_ir_31

9702_w13_ir_31

8 pages

9702_w12_ir_31

9702_w12_ir_31

8 pages

9702_w11_ir_31

9702_w11_ir_31

8 pages

9702_w10_ir_31

9702_w10_ir_31

8 pages

9702_s16_ir_31

9702_s16_ir_31

8 pages

9702_s15_ir_31

9702_s15_ir_31

8 pages

9702_s14_ir_31

9702_s14_ir_31

8 pages

9702_s13_qp_31

9702_s13_qp_31

12 pages

9702_s13_ms_31

9702_s13_ms_31

4 pages

9702_s13_ir_33

9702_s13_ir_33

8 pages

View more...
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks