expository writing

Please download to get full document.

View again

of 1
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information Report
Category:

Documents

Published:

Views: 10 | Pages: 1

Extension: PDF | Download: 0

Share
Related documents
Description
How to Jumpstart a Colton Eisenreich Car Volume 1, Issue 1 9/14/16 The How To: Is your car battery dead? the cables side of the cables to the Are you not able to go
Transcript
  9/14/16   Volume 1, Issue 1   Colton Eisenreich   side of the cables to the negative/Black terminal on the dead battery   14.   Connect the Red clip/side of the cables to the Positive/Red terminal on the dead battery 15.   Wait 30 seconds for the battery to get some charge 16.   Try to start the car with the dead battery 17.   When the car starts wait another 30 seconds 18.   Remove the cables from the recently dead bat-tery and lay them on the ground without letting them touch 19.   Remove the cables from the good battery and put the cables away   20.   Close the hoods to both cars 21.   Pull the car with the good battery away 22.   You can now use your car but you should let it run for at least a half an hour    The How To:   Is your car battery dead?  Are you not able to go any-where because of it? Instead of calling a mechanic to come to you and spending a lot of money you can learn how to do it yourself. This guide will help you revive dead car batteries. This guide will get your car bat-tery back up and running in no time. 1.   Grab your jumper ca-bles and get another car with a good battery   2.   Pull the other car in front of yours so the hoods are facing each other 3.   Open the hood to both cars 4.   Start the car with the good battery and keep it running through the rest of the steps 5.   Lay one end of the  jumper cables on the ground making sure the two ends aren ’ t touching 6.   Pick up the other side of the cables   7.   Locate the battery in the car with the good bat-tery (Look for a battery symbol indicating where the battery is or look for something that looks like Figure1)   8.   If there is a cap over the terminals of the battery remove these for ac-cess to the metal   9.   Connect the Black clip/side of the cables to the negative/Black terminal on the good battery 10.   Connect the Red clip/side of the cables to the Positive/Red terminal on the good battery 11.   Without letting the two ends touch pick up the cables 12.   Locate the battery in the car with the dead bat-tery (Look for a battery symbol indicating where the battery is or look for something that looks like Figure1)   13.   Connect the Black clip/   When done with these steps your car will be running just fine. The battery will be charged and ready to use any other time as long as you let your car run for at least a half an hour. This running time allows the bat-tery to regain its charge. If you are not successful or your car does not start you can either try the steps again or if it doesn't work again you may have to replace your battery. This pro-cess doesn't require much you just need  jumper cables and any other car that is availa-ble. When your car wont start and you know its your battery you now know how to fix the problem and get back on the road in no time.   How to Jumpstart a Car    Figure 1  
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks