Stf 05520 | Pipe (Fluid Conveyance) | Industries

Please download to get full document.

View again

of 13
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information Report
Category:

Documents

Published:

Views: 5 | Pages: 13

Extension: PDF | Download: 0

Share
Related documents
Description
free
Transcript
  December 1998  Process Industry PracticesStructural PIP STF05520Pipe Railing for Walking andWorking Surface Details  PURPOSE AND USE OF PROCESS INDUSTRY PRACTICESIn an effort to minimize the cost of process industry facilities, this Practice hasbeen prepared from the technical requirements in the existing standards of majorindustrial users, contractors, or standards organizations. By harmonizing thesetechnical requirements into a single set of Practices, administrative, application, andengineering costs to both the purchaser and the manufacturer should be reduced. Whilethis Practice is expected to incorporate the majority of requirements of most users,individual applications may involve requirements that will be appended to and takeprecedence over this Practice. Determinations concerning fitness for purpose andparticular matters or application of the Practice to particular project or engineeringsituations should not be made solely on information contained in these materials. Theuse of trade names from time to time should not be viewed as an expression of preference but rather recognized as normal usage in the trade. Other brands having thesame specifications are equally correct and may be substituted for those named. Allpractices or guidelines are intended to be consistent with applicable laws andregulations including OSHA requirements. To the extent these practices or guidelinesshould conflict with OSHA or other applicable laws or regulations, such laws orregulations must be followed. Consult an appropriate professional before applying oracting on any material contained in or suggested by the Practice. © Process Industry Practices (PIP), Construction Industry Institute,The University of Texas at Austin, 3208 Red River Street, Suite 300,Austin, Texas 78705. PIP member companies may copy this practicefor their internal use.  Not printed with State funds.  December 1998 Process Industry PracticesPage 1 of    11 Process Industry PracticesStructural PIP STF05520Pipe Railing for Walking andWorking Surface Details Table of Contents1. Introduction..................................2 1.1 Purpose................................................21.2 Scope...................................................2 2. References....................................2 2.1 Process Industry Practices...................22.2 Industry Codes and Standards.............22.3 Government Regulations .....................3 3. Definitions.....................................34. General..........................................3List of Details Plan - Typical Post Location........................5Elevation - Typical Railing...........................5Elevation A-A...............................................6Section B-B..................................................6Section C-C.................................................6Elevation D-D ..............................................7Elevation E-E...............................................7Handrail Attachment to Wall Details............8Post Connections to Structural Steel...........9Elevation - Removable Railing ..................10Post Connections to Concrete...................11  PIP    STF05520December 1998 Pipe Railing for Walking and Working Surface Details Page 2 of 11Process Industry Practices  1.Introduction 1.1Purpose The purpose of this Practice is to provide designers, fabricators, and installers withthe requirements for pipe railing. 1.2Scope This Practice shows the design, fabrication, and installation details for typicalstandard pipe railing for walking/working surfaces and stair railing or handrail foregress stairs at process industry facilities. 2.References When adopted in this Practice or in the contract documents, the latest editions of thefollowing codes, standards, specifications, and references in effect on the date of contractaward shall be used, except as otherwise noted. Short titles will be used herein whenappropriate. 2.1Process Industry Practices   PIP STS05120 - Fabrication of Structural and Miscellaneous SteelSpecification   PIP STS05130 -  Erection of Structural and Miscellaneous SteelSpecification 2.2Industry Codes and Standards     American Society for Testing and Materials (ASTM)–ASTM A36 - Standard Specification for Structural Steel –ASTM A53 - Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless –ASTM A307 - Standard Specification for Carbon Steel Externally and  Internally Threaded Standard Fasteners –ASTM A500 - Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks