All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.

Information Report

Category:
## School Work

Published:

Views: 142 | Pages: 10

Extension: PDF | Download: 1

Share

Related documents

Description

Solution Manual a First Course in the Finite Element Method 5th Edition Logan
https://testbankdata.com/download/solution-manual-first-course-finite-element-method-5th-edition-logan/

Transcript

INSTRUCTOR'S SOLUTIONS MANUAL TO ACCOMPANY
A FIRST COURSE IN THE
ELEMENT METHOD
FIFTH EDITION DARYL L. LOGAN
Solution Manual A First Course in the Finite Element Method 5th Edition Logan Instant download and all chapters A First Course in the Finite Element Method 5th Edition Logan SOLUTIONS MANUAL https://testbankdata.com/download/solution-manual-first-course-finite-
element-method-5th-edition-logan/
1 3 23 127 183 281 319 338 351 371 390 414 432 473 492 518 550 555 561
Contents
Chapter 1
1.1.
A finite element is a small body or unit interconnected to other units to model a larger structure or system. 1.2.
Discretization means dividing the body (system) into an equivalent system of finite elements with associated nodes and elements. 1.3.
The modern development of the finite element method began in 1941 withthe work of Hrennikoff in the field of structural engineering. 1.4.
The direct stiffness method was introduced in 1941 by Hrennikoff. However, it was not commonly known as the direct stiffness method until 1956. 1.5.
A matrix is a rectangular array of quantities arranged in rows and columns that is often used to aid in expressing and solving a system of algebraic equations. 1.6.
As computer developed it made possible to solve thousands of equations in a matter of minutes. 1.7.
The following are the general steps of the finite element method. Step 1 Divide the body into an equivalent system of finite elements with associated nodes and choose the most appropriate element type. Step 2 Step 3 Step 4 Step 5 Step Choose a displacement function within each element. Relate the stresses to the strains through the stress/strain law
—
generally called the constitutive law. Derive the element stiffness matrix and equations. Use the direct equilibrium method, a work or energy method, or a method of weighted residuals to relate the nodal forces to nodal displacements. Assemble the element equations to obtain the global or total equations and introduce boundary conditions. Solve for the unknown degrees of freedom (or generalized displacements). Solve for the element strains and stresses. Interpret and analyze the results for use in the design/analysis process. 1.8.
The displacement method assumes displacements of the nodes as the unknowns of the problem. The problem is formulated such that a set of simultaneous equations is solved for nodal displacements. 1.9.
Four common types of elements are: simple line elements, simple two-dimensional elements, simple three-dimensional elements, and simple axisymmetric elements. 1.10 Three common methods used to derive the element stiffness matrix and equations are (1)
direct equilibrium method (2)
work or energy methods (3)
methods of weighted residuals 1.11.
The term ‘degrees of freedom’ refers to rotations and displacements that are associated with each
node.
1
© 2012 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part.
1.12.
Five typical areas where the finite element is applied are as follows. (1)
Structural/stress analysis (2)
Heat transfer analysis (3)
Fluid flow analysis (4)
Electric or magnetic potential distribution analysis (5)
Biomechanical engineering 1.13.
Five advantages of the finite element method are the ability to (1)
Model irregularly shaped bodies quite easily (2)
Handle general load conditions without difficulty (3)
Model bodies composed of several different materials because element equations are evaluated individually (4)
Handle unlimited numbers and kinds of boundary conditions (5)
Vary the size of the elements to make it possible to use small elements where necessary 2
© 2012 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part.

Recommended

Related Search

medical technology course in the philippinesphysical therapy course in the philippinesenglish as a second language in the united stFinite Element MethodExtended finite element methodScaled Boundary Finite Element Methodextended finite element method (XFEM), computSmoothed Finite Element Methodintroduction to finite element methodNon-linear Finite Element Method

We Need Your Support

Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks