Instruction Manual. from software version 1.0 (instruction version 1.0) Internet:

Please download to get full document.

View again

of 25
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information Report
Category:

Automotive

Published:

Views: 3 | Pages: 25

Extension: PDF | Download: 0

Share
Description
Instruction Manual from software version 1.0 (instruction version 1.0) Internet: This side is intentionally unlabelled. GLP German Light Production (V1.0) 2 Table
Transcript
Instruction Manual from software version 1.0 (instruction version 1.0) Internet: This side is intentionally unlabelled. GLP German Light Production (V1.0) 2 Table of contents 1 Description of Device Safety Instructions Preparation and Installation Mounting Clamps Mounting plate Secure the YPOC 250 COLOR Connections Power supply DMX Fuse The Menu Field Adjust the DMX- Address (D001) The Test Program (TEST) The Audio Program (AUDI) Lamp On/Off (LAMP) Reset (RESE) Running time of lamp and unit (TIME) Continuous Color Wheel (FCOL) Invert Pan Movement (RPAN) Invert Tilt Movement (RTLT) Special Functions (SPEC) Manual Drive (MANU) Lamp On automatically (LAAU) Lamp Off via DMX (DLOF) DMX Input (DMXI) Display (DISP) Fixture Temperature (TEMP) Fan Control (FANS) Adjustments and Calibrations (ADJU) Default Settings (DFSE) Feedback (FEED) Correction of faults (EFLD) Error and Information Messages GLP German Light Production (V1.0) 3 4 DMX Channel Selection (DMX Protocol) Change the Lamp Safety Regulations Realize the Lamp Change Maintenance and Cleaning the YPOC COLOR Basic Safety Regulations Circumference and Interval (rule-of-thumb) Cleaning the Optical System Technical Specification Index GLP German Light Production (V1.0) 4 M in Serial num ber: M ax PUSH 1.Groun d 2.Data - 3.Data + FUSE 1 Description of Device Moving Head 2. Arm 3. Base 4. Carrying handles Up- button 6. Down- button Enter- button 8. Mode- button 9. LED- Display 11 DMX IN DMX OUT POWER FUSE: LAMP: MSD 250W Power input 210V~ 230V~ 250V~ 50Hz 60Hz Fuse Software-Update Mic Sensitive Software Update COLOR connector Microphone- Intensity 12. DMX- Input 13. DMX- Output 9 MODE ENTER DOWN UP Power On/Off MODE ENTER UP DOWN COLOR 15. Fuse F3,15 A 16. Fan (air inlet) GLP German Light Production (V1.0) 5 1.1 Safety Instructions The YPOC COLOR Basic is a High-Tech Product. To guarantee a smooth operation, it is necessary to keep following rules. The manufacturer of this device will not take responsibility of damages through disregard of the information in this manual. Warranty adjustments will be canceled. 1. Make sure before putting into operation, that the fan and the air inlets are clean and not blocked by anything. 2. Attention: Don t touch the device during the operation. This can cause injuries or damages. 3. Unplug the YPOC COLOR Basic from the AC outlet before any service. 4. It is necessary to wait at least 30 minutes after disconnecting the AC before you open the YPOC COLOR Basic. Please do not touch the bulb of the lamp if you are not absolutely sure it is cold. -DANGER OF BURNING- 5. Never look directly into the beam of the lamp. You risk injury of your retina and blindness. 6. Pay attention of the maximum lamp operation time. You have to change it if the lamp shows any deformations or damages. The same is with all glass components, color filters, lenses and mirrors. 7. To allow a secure operation, follow also the Installation guide described in chapter 2. Operating the YPOC COLOR Basic without suited safety aids like Safety cables or clamps/hooks can increase the risk of an accident. 8. The installation should be done by qualified staff only. You need to pay attention to the common rules of technology that are not explicit mentioned in this manual. 9. Use only original spare parts. Any structural modification will cancel all warranty adjustments. GLP German Light Production (V1.0) 6 2 Preparation and Installation 2.1 Mounting The YPOC COLOR Basic is fully operational whether it hangs or is mounted to the wall. It can also be operated while standing on the floor. Keep a safety distance of 0.5 m towards any easy inflammable materials (decoration etc.). Install a safety wire that can hold at least 10 times the weight of the fixture. Never use the carrying handles for secondary attachment. Pay attention to the regulations of: BGV C1 (former VBG 70) and DIN VDE ! The installation should be done by qualified staff only Clamps Use two clamps on the backside of the YPOC COLOR Basic to mount the unit on a truss (each two opposite threads max. M10x20). See also printing on the backside of the case. GLP German Light Production (V1.0) 7 2.1.2 Mounting plate For a permanent installation of the YPOC COLOR Basic you can use a optional mounting plate to fix the unit on a wall. The plate uses 4x screws M6x Secure the YPOC COLOR Basic Regardless of the rigging of the YPOC COLOR Basic you have to use a stipulated safety wire. Therefore you have to thread to safety wire through to two provided holes on the backside of the fixture and connect it with the truss-support. Pay attention to a safe and proper fastening. GLP German Light Production (V1.0) 8 2.3 Connections Power supply 230 Volt, 50 Hz, Connected load 500W = 2,2 A (blind current compensation). or 115V, 60 Hz Connected load 500W = 4,4 A (blind current compensation). Please see printing on the case for the right Power supply! DMX DMX 512 Standard input/output. See also printing on the case for the right pin assignment. [+] = Pin 3 / [-] = Pin 2 / [Ground] = Pin 1 The DMX- Addressing starts at the DMX- Address [001]. 2.4 Fuse The YPOC COLOR Basic electronic system is protected by a 5x20 mm fuse. 230V / T 3,15A (EU model) or 115V / T 6,3A (US model) Please see the printing on the YPOC COLOR Basic for more details. Attention: Disconnect AC outlet before changing a fuse! Use only the original declared fuse type! GLP German Light Production (V1.0) 9 3 The Menu Field You find the control board on the side part of the base. It allows you to make all necessary adjustments of the YPOC COLOR Basic. With the Mode-key you get into the main menu. Afterwards you can navigate through the menu with the Up/Down-keys. Push the Enter-key to get in the next menu level or to confirm your settings. Make them and set functions ON/OFF with the Up/Down-keys. Confirm and save it with the Enter-key (the display shows OK). Push the Mode-key to cancel the entry and go back to the main menu. LED-Display E MODE ENTER DOWN UP D O M R E T N E N W O D Mode-key Enter-key Down-key P U Up-key DOWN - UP Level 1 Level 2 Level 3 Remark D001 Define the DMX start address TEST Test program of all functions AUDI ASLW Self-running audio program (slow) AFST Self-running audio program (fast) MSTR Master for the audio program SVPT Basic position for the audio program SIZE Size for the audio program (NORM-BIG-MIDL-SMAL) LAMP Switch on/of the lamp direct at the YPOC COLOR Basic RESE Reset TIME POWR Running time of the fixture (no destructible) LA1 Running time of the lamp (erasable) LA2 Running time of the lamp (no destructible) FCOL Continuously movement of the color wheel RPAN Reverse Pan-direction RTLT Reverse Tilt-direction SPEC MANU Manual drive of all device functions LAAU Automatic lamp start DLOF Switch off lamp via DMX DMXI Reed out actual DMX-values DISP D ON Display On/Off REV Twist the display TEMP Reed out internal temperature FANS HIGH Maximum cooling fan velocity REG Automatic cooling fan control LOOF Low cooling fan speed lamp off LOHI Low cooling fan speed automatic ADJU CODE Use the code for entering the calibration menu (for xxxx authorized person only) COLO Calibration of the color wheel clre Settings in the internal memory (superuser only) facc Must read on. Protected by a code ARES Adjust- Rest DFSE Call on the default function values FEED Pan/Tilt feedback (error correction) On/Off EFLG Correction of faults GLP German Light Production (V1.0) 10 3.1 Adjust the DMX- Address (D001) Right after turning on the YPOC COLOR Basic you can see the current DMX- Address. If there is no DMX- Signal the display flashes. D001 For the address setting please follow this procedure: 1. Switch On the YPOC COLOR Basic and wait until the fixture reset has finished ('RESE' is flashing in the display). 2. Press the Mode-key in order to access the main menu. Browse through the menu by pressing the Up/Down-keys until the display shows D001. Confirm by pressing the Enter-key (the decimal point is flashing) 3. Use the Up/Down-keys to select the desired address. Confirm the setting by pressing the Enter-key (the display shows OK) or press the Mode-key to cancel. The DMX- Address is stored also while switching off the YPOC COLOR Basic! 3.2 The Test Program (TEST) Test The Test-Program allows you to run a complete self test procedure of all functions. Press Enter to confirm or Mode to cancel. 3.3 The Audio Program (AUDI) The Audio-menu allows you to run a stand alone audio program. This chaser can run either fast or slow. AFST: Every sound impulse on step of the chaser. Aslw: Every second sound impulse one step of the chaser. Additional you can choose a basic position for this audio chaser. Use therefore either the internal manual mode or an external controller to set the desired Pan/Tilt position. Confirm this setting in the SPCT menu by pressing the Enter-key. You can also set the size of the audio chaser in the SIZE menu. You have the choice between: NORM (no basic position has to bee chosen), 'BIG', 'MIDL' and 'SMAL'). If you want to run the systems simultaneously, one of the YPOCs must be GLP German Light Production (V1.0) 11 switched as the master. All others must be Slave Master = OFF. Notice: The Audio function is only working when no DMX is connected. This function can work e.g. on small events or as an emergency program. 3.4 Lamp On/Off (LAMP) LAMP Use the Up/Down-keys to select lamp On or lamp Off Press Enter to confirm or Mode to cancel and return to the main menu. (The lamp OFF command is only working if the shutter is closed at the same time. Use an external controller or the manual drive mode, see on page Reset (RESE) RESE Press the Enter-key to run a reset of all fixture functions (RST is shown in the display). 3.6 Running time of lamp and unit (TIME) TIME By this option can read out three different running times of the fixture. POWR LA 1 LA 2 Running time of the fixture (no destructible). Running time of the lamp (erasable). Push the Up/Down-keys at one time to delete this running time. Running time of the lamp (no destructible). 3.7 Continuous Color Wheel (FCOL) FCOL This function allows you to control the color wheel continuously. If it is switched off, the color wheel is stepping directly from one to another color. 3.8 Invert Pan Movement (RPAN) RPAN GLP German Light Production (V1.0) 12 This function allows you to invert the Pan movement. Use the Up/Down-keys to select invert On or Off. Press Enter to confirm or Mode to cancel and return to the main menu. 3.9 Invert Tilt Movement (RTLT) RTLT This function allows you to invert the Tilt movement. Use the Up/Down-keys to select invert On or Off. Press Enter to confirm or Mode to cancel Special Functions (SPEC) SPEC This menu allows you to enter further special functions of the YPOC COLOR Basic. In detail they are: Manual Drive (MANU) MANU This function allows you to drive all the fixture functions manually. Select the desired function with the Up/Down-keys and confirm with Enter. Now choose the desired value with the Up/Down-keys and confirm again with Enter or cancel and return to the menu with the Mode-key. Function Value Remark PAN Pan Position TILT Tilt Position COLO Color wheel (fixed colors) SHUT Shutter / Strobe function (the lamp strikes at DMX 255 if dimmer is open = DMX 255) DIMR Dimmer SPEC Lamp Off, Reset, Lamp On automatically (LAAU) LAAU GLP German Light Production (V1.0) 13 This function enables to switch On the lamp automatically after switching On the fixture. Use the Up/Down-keys to select ON if you want to switch on the lamp automatically after switching on the fixture or Off if you don't want this function. Press Enter to confirm or Mode to cancel and return to the menu. If you have chosen off you have the possibility to start the lamp either via DMX or direct at the YPOC COLOR Basic in the Lamp menu Lamp Off via DMX (DLOF) DLOF This function enables to switch off the lamp via DMX or not. Use the Up/Down-keys to select ON if you want to switch off the lamp via DMX or Off if you don't want this function. Press Enter to confirm or Mode to cancel and return to the menu DMX Input (DMXI) DMXI Readout DMX values of each channel received by the fixture. Use the Up/Down-keys to select desired channel and press Enter to read its value. Function Value Remark PAN Pan Position TILT Tilt Position COLO Color wheel (fixed colors) SHUT Shutter / Strobe function SPEC Lamp OFF, Reset, MOVE Movement SPED Speed Pan/Tilt GLP German Light Production (V1.0) 14 Display (DISP) DISP Use this function to choose between different display indications. Use the Up/Down-keys to select desired function and press Enter to confirm or Mode to cancel and return to the menu. D ON Display On/Off (If you've chosen off, the display will go out within 15 seconds after the last input. The next key touch will reactivate the display). REV Turn around the display Fixture Temperature (TEMP) TEMP This function allows you to read out the actual temperature of the YPOC COLOR Basic. Press Enter to confirm or Mode to cancel. Inside temperatures below 80 C are not critical. 80 C and more lead the lamp being switched off at a critical point. Please note for a save operation that the outside temperature should not exceed 45 C Fan Control (FANS) FANS By using this function you can choose between 4 types of fan speed operations. Use the Up/Down-keys to select desired function and press Enter to confirm or Mode to cancel and return to the menu. HIGH The cooling fan works continuously at max. speed. REG The fan automatically raises its speed in order to control inside temperature of the fixture. LOOF The fan keeps the adjusted low speed until the temperature exceeds max. inside temperature, then the YPOC COLOR Basic automatically switch off the lamp. LOHI The fan keeps the adjusted low speed until the temperature exceeds max. inside temperature, then the YPOC COLOR Basic automatically switch from low to high fan speed. GLP German Light Production (V1.0) 15 Adjustments and Calibrations (ADJU) ADJU By this function you can adjust and calibrate the positions of the different wheels and other motors. This can be necessary after a service or repair work. For this function you have to entry the fixture code. This work should be done only by authorized persons. Use the Up/Down-keys to select desired function and press Enter to confirm or Mode to cancel and return to the menu. Use now the Up/Downkeys to set the adjustment values and confirm once more with the Enterkey or cancel with the Mode-key. Function Value Remark COLO Color wheel CLRE Adjustments in the internal circuit. FACC Must read ON ARES Adjust- Reset For authorized persons only Service manual Default Settings (DFSE) DFSE Press Enter to reset all fixture personalities (not the adjusted functions) to the default values. On the display will appear ok to indicate that the defaults are set. Function Display Default Settings DMX Address D001 D001 Pan reverse RPAN ON OFF Tilt reverse RTLT ON OFF Automatic lamp on LAAU ON OFF Lamp on via DMX DLOF ON OFF Display DISP D ON Cooling fan FANS HIGH REG LOOF LOHI Feedback FEED ON OFF GLP German Light Production (V1.0) 16 Feedback (FEED) FEED The YPOC COLOR Basic is provided with a automatic position correction (feedback) for the Pan and Tilt movement. Use the Up/Down-keys to select ON if you want to enable the feedback function or Off if you don't want this function. Press Enter to confirm or Mode to cancel and return to the menu Correction of faults (EFLD) EFLG (Function available for authorized persons only) 3.11 Error and Information Messages HEAt This message appears if you try to switch on the lamp within 5 minutes after having switched off (lamp too hot). The message will appear on the display if the lamp doesn t ignite within 20 seconds. The fixture will store this command and automatically ignite the lamp after 5 minutes. LaeR OTMP RsER After the ignition of the lamp was two times not successful the display will show LAER. That means the lamp could be damaged or even missed, the fixture is overheating or there could be a failure on the igniter or ballast. Switch off the power supply and solve the possible problem. This error message informs you that the fixture was overheating and that the relay switches off the lamp. Pleas look for possible reasons (fan faulty, air in/outlets blocked or very dirty, lamp broken or very old, too high ambient temperature. Switch off the power supply and solve the possible problem. This message informs you that one of the fixture function wasn t able to do its reset correct (magnetic sensor, stepping motor, driver on the PCB, cables, etc.). Repair the defect and start the fixture again. GLP German Light Production (V1.0) 17 4 DMX Channel Selection (DMX Protocol) Channel Function Time and Value DMX HEX % 1) PAN-coarse min s FF ) PAN-fine Low- Pos... High- Pos (16 Bit) FF ) Tilt-coarse min. 1.8 s FF ) Tilt-fine Low- Pos High- Pos (16 Bit) FF ) Color* open (fast) Chaser from color to ,2 color 1, Brilliant Blue (fast) color max. 140 BPM ,8 color 2, Blue (fast) 0,43 s B 3,3 color 3, Blue Purple (fast) C..0F 4,9 color 4, Magenta (fast) ,5 color 5, Pink (fast) ,0 color 6, Orange (fast) B 9,6 color 7, Canary (fast) C..1F 11,2 color 8, Italian Blue (fast) ,7 color 9, Turquoise (fast) ,3 color 10, Jade (fast) B 15,9 color 11, Red (fast) C..2F 17,5 open (fast) F 19,0 open (slow) Chaser from color to ,3 color 1, Brilliant Blue (slow) color max. 70 BPM ,9 color 2, Blue (slow) 0,86 s B 28,4 color 3, Blue Purple (slow) C..4F 30,0 color 4, Magenta (slow) ,6 color 5, Pink (slow) ,1 color 6, Orange (slow) B 34,7 color 7, Canary (slow) C..5F 36,3 color 8, Italian Blue (slow) ,8 color 9, Turquoise (slow) ,4 color 10, Jade (slow) B 41,0 color 11, Red (slow) C..6F 42,5 open (slow) F 44,1 color rotation, slow-fast, CW min. 1.4 turns/h BF color rotation, fast-slow, CCW max. 2.9 turns/sec C0..FD Audio color chaser slow each 4 th sound impulse new color 254 FE 99 Audio color chaser fast each sound impulse new color 255 FF 100 6) Shutter Shutter closed F 0..6 Random Strobe (different pattern) F 7..11,9 Strobe Pulse effect, slow - fast min. frequency 0,7 Hz F ,9 Strobe effect, slow - fast max. frequency 10 Hz EF Shutter open F0..FF Lamp ON (ignition) FE..FF ) Dimmer Dimmer closed (0%) Dimmer 1%...99% movement time 0,3 Sek FB Dimmer open (100%) FC..FF ) Special No function F 0..6 Rotating color chaser F Color chaser C / C F slow fast Color chaser C / C+2 slow fast F PAN/Tilt chaser slow F GLP German Light Production (V1.0) 18 Channel Function Time and Value DMX HEX % 9) Movement 10) Speed Pan/Tilt PAN/Tilt chaser fast F Lamp OFF (only if shutter is closed)! E6..F Reset FA..FF No movement Movement Size Phase PAN , , , ,5 PAN , A..0B 4, C..0D 4, E..0F 5,7 PAN , , , ,8 PAN , A..1B 10, C..1D 11, E..1F 12 TILT size / phase see also PAN F PAN / TILT size / phase see also PAN F PAN / TILT (inverse) size / phase see also PAN F Circle size / phase see also PAN F Circle (inverse) size / phase see also PAN A0..BF lying eight size / phase see also PAN C0..DF random movement size see also PAN E0..FF Pan/Tilt relative movement F 0..6 Pan/Tilt slow fast Pan Min. 530 = 200 s FF Use this channel 14) also for the Pan Max. 530 = 2.65 s speed of the movements (channel Tilt Min. 285 = 110 s 13). Tilt Max. 285 = 1.8 s Lamp ON Shutter open FE..FF Channel 8 ( min. 3 sec. ) (only if E6..F Lamp OFF shutter is closed, channel 6 = 0..15) *) Set the function FCOL ON if you want to control the color wheel continuously. GLP German Light Production (V1.0) 19 5 Change the Lamp For a frictionless operation pleas read this chapter carefully and follow all instructions. 5.1 Safety Regulations Pull out the main plug! Wait min. 20 minutes after the last operation to cool down the fixture. Don t touch the bulb of the lamp with bare fingers (this can cause damages. Before you put the YPOC COLOR Basic into operation close the casing, otherwise your retina can be hurt! 5.2 Rea
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks
SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!

x