SB50 Anderson Connectors

Please download to get full document.

View again

of 6
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information Report
Category:

Brochures

Published:

Views: 2 | Pages: 6

Extension: PDF | Download: 0

Share
Description
Anderson Connectors Catalogue
Tags
Transcript
  www.andersonpower.com - 57 -  All Data Subject To Change Without Notice SB ® 50 Connectors- up to 120 amps | SB50 ® ORDERING INFORMATION | Based off the design pioneered by Anderson in 1953, APP ® ’s two pole SB ® connectors set the standard for DC power distribution and battery connections. SB ® 50connectors feature a one piece plastic housing usingstainless steel springs to hold low resistance contacts inplace. Wires sizes from #16 (1.5 mm²) to #6 (13.3 mm²)are held in the smallest of the SB ® series housings. ã Low Resistance Silver or Tin Plated Copper Contacts Allows UL rated currents up to 120 amps ã UL Rated for Hot Plugging up to 50 Amps Great for battery or other applications where the ability tointerrupt circuits is required  ã Wire, PCB, and Busbar Contacts Allows one connection system to meet multiple needs SB  ®  50 Standard Housings The smallest SB ® housings work with wire contacts up to6 AWG [10 mm²] as well as PCB, and busbar contacts.Genderless design mates with itself. Mechanical keys arecolor coded. VoltageColor Description Code ---- Part Numbers ----Minimum Quantity .... 500 100 ...Yellow 12V 992G5-BK 992G5Orange 18V 992G7-BK 992G7Red 24V 992G1-BK 992G1Gray 36V 992-BK 992Blue 48V 992G4-BK 992G4Green 72V 992G6-BK 992G6Black 80V 992G2-BK 992G2NOTE: SB ® 50 Black and Gray housings have thesame keying features and can be intermated. SB  ®  50 Chemical Resistant Housings Same features as the Standard SB ® 50 but molded in achemical resistant PBT/ PC blend. Suitable for use to -40°C.VoltageColor Description Code ---- Part Numbers ----Minimum Quantity .... 500 100 ...Red 24V P992G1-BK P992G1Gray 36V P992-BK P992Black 80V P992G2-BK P992G2NOTE: SB ® 50 Black and Gray housings have thesame keying features and can be intermated.  S E  C T I   ON 3   S B  ®  5  0  [ 81.3 ]3.20[ 3.7 ]Ø 0.14(2) PLC’S[ 15.9 ]0.63Material ID[ 35.1 ]1.38[ 22.5 ]0.89[ 19.1 ]0.75[ 6.4 ]0.25  Bottom ViewMated LengthP = Chemical Resistant  www.andersonpower.com - 58 -  All Data Subject To Change Without Notice SB  ®  50 Silver Plated Wire Contacts Use two silver plated contacts per housing for the best electricalperformance and durability up to 10,000 mating cycles.DimensionsMating Loose Piece - A - AWG mm² Force --- Part Numbers --- inches mmMinimum Quantity ................... 1,000 100 ......................... 6 13.3 Low 1307-BK 1307 0.22 5.596 13.3 High 5900-BK 5900 0.22 5.598 8.4 High 5952-Bk 5952 0.19 4.8312 to 10 3.3 to 5.3 Low 5953-BK 5953 0.14 3.5612 to 10 3.3 to 5.3 High 5915-BK 5915 0.14 3.56 SB  ®  50 Tin Plated Reeled Wire Contacts Use two reeled contacts per housing. Reeled contacts are for use with the recommendedhigh volume press and applicator tooling. Rated for up to 1,500 mating cycles.DimensionsMating Reeled - A - - B - AWG mm² Force - Part Numbers - inches mm inches mmMinimum Quantity ...................... 2,000 .................................................8 to 6 8.4 to 13.3 High 265G5 0.26 6.60 0.36 9.1412 to 10 3.3 to 5.3 High 265G6 0.17 4.32 0.29 7.37 SB  ®  50 Silver Plated Busbar Contacts Use 2 busbar contacts per housing to provide a quick disconnect input or outputbusbar connection. Busbar contacts are for mating with wire contacts only. Part number 75BBS includes lock nuts. Locknuts must be ordered separately for B01956P4.MatingType Thread Force ----------- Loose Piece Part Numbers -----------Minimum Quantity ................. 1,000 120 20 10 ...Busbar #10-24 High - B01956P4 - 75BBSLock Nut #10-24 - H1216P8 - 110G54 - 55A Right Angle Standard Powerclaw PCB Contacts Standard Powerclaw contacts are for use inside a SB ® 50 housingand provide a color coded right angle connection to the PCB.Description - Loose Piece Part Numbers -Minimum Quantity .... 500 100 .......Tin Plated PC5930T-BK PC5930TSilver Plated PC5930S-BK PC5930S 55A Right Angle Mini Powerclaw PCB Contacts Right angle Mini Powerclaw contacts can be used on the PCB edgewithout a SB ® 50 housing on the PCB side. A self polarizing design onlyallow SB ® 50 wire housings to mate to PCB contacts one way.Description - Loose Piece Part Numbers -Minimum Quantity .... 1,000 100 .......Tin Plated PC5934T-BK PC5934TSilver Plated PC5934S-BK PC5934S    S   E   C   T   I   O   N   3    S   B    ®     5   0 [ 32.2 ]1.27 AB [ 69.1 ]2.72[ 2.0 ]0.08[ 17.1 ]0.68 See Busbar contact drawing onwebsite for further detail. [ 7.1 ]0.28B ADC [ 3.7 ]Ø 0.14 (2)[ 11.4 ]0.45[ 22.6 ]0.89[ 19.05 ]0.750[ 21.6 ]0.85[ 8.0 ]0.32[ 27.4 ]1.08[ 35.0 ]1.380[ 15.6 ]0.62[ 63.6 ]2.51[ 23.7 ]0.93[ x ]x Top ViewSide ViewSee PCB contact drawing on website for further detail. [ 25.4 ]1.00[ 12.19 ]0.480[ 1.27 ]0.050[ 17.5 ]0.69[ 6.10 ]0.240[ 2.42 ]0.095[ 24.6 ]0.97[ 8.1 ]0.32[ 7.6 ]0.30  www.andersonpower.com - 59 -  All Data Subject To Change Without Notice 55A Vertical Mini Powerclaw PCB Contacts Vertical Mini Powerclaw contacts save space by not requiring a SB ® 50housing on the PCB side. The guide housing is required for to provide apolarized connection. (See SB ® 50 accessories).Description - Loose Piece Part Numbers -Minimum Quantity .... 1,500 100 .........Tin Plated PC5933T-BK PC5933TSilver Plated PC5933S-BK PC5933S | SB ® 50 CONNECTOR SPECIFICATIONS | Electrical Current Rating Amperes¹ UL 1977 CSA Wire to Wire UL 1977 (6 AWG) 120 50Wire to PCB UL 1977 (6 AWG) 50 Voltage Rating AC/DC UL 1977 600  PCB Connector Recommended Voltageper IEC 60950-1 Table 2L Pollution Degree 2 Mini Vert. Contact 522Mini Horiz. Contact 504Standard Contact 950  Dielectric Withstanding Voltage  Volts AC 2,200  Avg. Mated Contact Resistance Milliohms¹  1 1/4” of #6 AWG wire 0.200PCB Contact to Contact 0.500  UL Hot Plug Current Rating Amperes - 250 cycles at 120V DC  Wire- wire 50APCB- wire 40A(Vertical Mini Powerclaw) Mechanical Wire Size Range AWG mm² 16 to 6 1.3 to 13.3  Max. Wire Insulation Diameter in. mm 0.440 11.200  Operating Temperature² °F °C Standard -4° to 221° -20° to 105°Chemical Resistant* -40 to 221° -40° to 105°*Chemical resistant material not available for PCB guide housings Mating Cycles No Load by Plating Silver (Ag) Tin (Sn) Wire and PCB Contacts 10,000 1,500  Avg. Mating / Unmating Force Lbf. N Wire to Wire Low Force Contacts 10 44Wire to Wire High Force Contacts 15 67Standard Powerclaw to Wire 15 66Mini Powerclaw to Wire 8 36  PCB Specications  Mounting Style Plated Through HoleMax PCB Thickness- in. [mm] Standard: 0.15 [0.381]Mini: 0.25 [0.635]Recommended Traces #8 AWG Cross Section Min. Contact / Spring Retention Force Lbf. N Wire Housing 50 222  Min. Creepage / [Clearance] Distance in. mm Standard Powerclaw 0.374 9.5Mini Vert. Powerclaw 0.213 5.4Mini Horz. Powerclaw 0.205 5.2 Materials Housing Standard Plastic Resin PolycarbonateChem. Resistant Resin Polycarbonate / PBT blendContact Retention Spring Stainless Steel  Housing Flammability Rating  UL94 V-0  Contact Base Copper AlloyWire Plating Silver PCB Plating Sn or Ag over Ni  Contact Termination Methods  Crimp³ Wire ContactsHand Solder Wire and PCB ContactsSolder Dip* PCB ContactsWave Solder* PCB ContactsWrench / Socket Busbar Contacts¹ Based on: 105°C rated or better cable of the largest size, Properly calibrated APP ®  recommended tooling, and a 25°C ambient temperature. UL rating not to exceedthe maximum operating temperature. CSA rating below a 30°C temperature rise.² Limited by the thermal properties of the connector plastic housing.³ Use APP ® recommended tooling only. Alternate tools may adversely affect theperformance of our connectors along with UL and CSA recognition.  S E  C T I   ON 3   S B  ®  5  0  Protection Touch Safety with Wire Contacts IEC 60529 IP10 [ 12.2 ]0.48[ 24.3 ]0.96[ 9.7 ]0.38[2.32]0.091[ 10.29 ]0.405[ 6.25 ]0.246[ 1.27 ]0.050[ 4.98 ]0.196  www.andersonpower.com - 60 -  All Data Subject To Change Without Notice “T” Handle The “T” handle makes mating and unmating the connector easier. Thenon-conductive red plastic material is strong and safe. (2) Self tappingscrews are used to secure the handle to the connector housing.Description --------- Part Numbers ---------Minimum Quantity ............................... 1,000 50 ........Red “T” Handle + Hardware Bag - SB50-HDL-REDHardware Bag (2 Screws) - 104G17Red “T” Handle Only 113899P1 -#8 x 5/8” Screw (Order 2 Per Handle) H1120P41 -  Dust Cover  Prevents dust and dirt from entering the mating interface of the connector when unmated. NOTE: Not a Hermetic Seal.Description ---- Part Numbers ----Minimum Quantity .............................. 500 50 ...Dust Cover with Lanyard Strap, Red 113890P1 134G1 | SB ® Accessories || SB ® 50 CONNECTOR TEMPERATURE CHARTS | 6 AWG 8 AWG10 AWG 12 AWG2550751001250102030405060708090100SB ® 50Derating vs. Ambient Temperature    T  e  m  p  e  r  a   t  u  r  e   (   °   C   )  Amperes Applied    S   E   C   T   I   O   N   3    S   B    ®     5   0 (2) Self-tappingScrewsHandleConnector Housing Slide cover over mating end. 010203040506001020304050607080906 AWG 8 AWG10 AWG 12 AWGSB ® 50Temperature Rise at Constant Current    T  e  m  p  e  r  a   t  u  r  e   (   °   C   )  Amperes Applied NOTE: Temperature rise charts are based on a 25°C ambient temperature. Powerclaw charts are based on #8 AWGequivalent copper foil on board side, mated to #6 AWG conductor on wire side. 2550751001250 10 20 30 40 50 60 70 80 90 100110Mini PowerclawDerating vs. Ambient Temperature    T  e  m  p  e  r  a   t  u  r  e   (   °   C   )  Amperes AppliedSB50 01020304050600102030405060708090Mini PowerclawTemperature Rise at Constant Current    T  e  m  p  e  r  a   t  u  r  e   (   °   C   )  Amperes AppliedSB50
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks
SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!

x