SAFETY DATA SHEET. Q-Pearl Solder Spheres Sn10/Pb88/Ag2. MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS Qualitek International, Inc. - PDF

Please download to get full document.

View again

of 6
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information Report



Views: 25 | Pages: 6

Extension: PDF | Download: 0

Related documents
Page 1 of 6 1. PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: PRODUCT DESCRIPTION: Solder Spheres Sn10/Pb88/Ag2 MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS Qualitek International, Inc Infotrac 315 Fairbank St Outside the U.S. Addison, IL Emergency Phone: (800) Service Number: (630) HAZARDS IDENTIFICATION GHS CLASSIFICATIONS Health: Target Organ Toxicity (Repeated exposure), Category 1 Reproductive Toxicity, Category 1 GHS LABEL Health hazard Exclamation mark SIGNAL WORD: DANGER HAZARD STATEMENTS H372: Causes damage to organs [or state all organs affected, if known] through prolonged or repeated exposure [state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard]. H360: May damage fertility or the unborn child [state specific effect if known] [state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard]. PRECAUTIONARY STATEMENT(S) Prevention: P264: Wash hands thoroughly after handling. Response: P301+A2317: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell. Disposal: Page 2 of 6 P501: Dispose of contents/container in accordance to local/regional/national/international regulations. POTENTIAL HEALTH EFFECTS EYES: Fumes from this and other soldering products may cause eye irritation. SKIN: Fumes from this and other soldering products may cause skin irritation. INGESTION: Ingestion of this or other soldering products may cause headache, nausea, and muscular pain. INHALATION: Inhalation of the fumes from this or other soldering products may cause headache, nausea and muscular pain. CARCINOGENICITY: Not listed as a carcinogen by NTP, OSHA, or ACGIH. MEDICAL CONDITIONS AGGRAVATED: Pre-existing conditions of the lungs, kidneys, nervous system and possibly reproductive systems; diseases of the blood forming organs ROUTES OF ENTRY: Inhalation, ingestion, eye or skin contact. 3. COMPOSITION / INFORMATION ON INGREDIENTS Chemical Name Wt.% CAS Tin Lead Silver FIRST AID MEASURES EYES: MOLTEN PRODUCT: Cool burns with plenty of low-pressure water. Get immediate medical attention. SOLID PRODUCT: Remove any contact lenses. Immediately flush eyes with large quantities of water for at least 15 minutes. Get medical attention if irritation develops. SKIN: MOLTEN PRODUCT: Immeditely cool skin burns with water and cold packs for at least 15 minutes. Do not put ice directly on the skin. Do not attempt to remove solidified product from the skin, as damage may result. Get immediate medical attention. SOLID PRODUCT: Immediately wash skin with soap and copious amounts of water. Use lotion to prevent dryness. Get medical attention if irritation develops. INGESTION: If person is conscious, immediately give 2 glasses of water. Do not induce vomiting. Get immediate medical attention. INHALATION: If symptoms of overexposure are experienced, evacuate to fresh air. If symptoms persist, seek medical attention. SIGNS AND SYMPTOMS OF OVEREXPOSURE SKIN: Discomfort or rash. INHALATION: Irritation of the pulmonary system. CHRONIC EFFECTS: Prolonged or repeated exposure due to ingestion may cause anemia, insomnia, weakness, Page 3 of 6 constipation and abdominal pain. Prolonged or repeated exposure due to skin exposure and inhalation may cause skin rash and damage to the mucous membranes. COMMENTS: If victims of chemical over-exposure are taken for medical attention, give a copy of the label or this MSDS to the physician/health care professional. 5. FIRE FIGHTING MEASURES EXPLOSION HAZARDS: None known. FIRE FIGHTING EQUIPMENT: Self contained breathing apparatus with full face piece operated in positive pressure demand mode, appropriate turn-out gear and chemical resistant personal protective equipment is recommended. 6. ACCIDENTAL RELEASE MEASURES GENERAL PROCEDURES: If the material is in its solid state, pick up and reuse. When molten, allow to solidify, and then reuse if it is not contaminated. If contaminated, refer to Section 13 for proper disposal procedures. RELEASE NOTES: Avoid repeated or prolonged breathing or skin contact. Wash hands immediately, and remove material from under the fingernails. 7. HANDLING AND STORAGE GENERAL PROCEDURES: Do not store or use near sparks or open flames. Keep containers tightly closed and upright when not in use in order to prevent leakage. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION ENGINEERING CONTROLS: General (mechanical) room ventilation is expected to be satisfactory where this product is stored and handled and in closed equipment. Special local ventilation is needed at points where vapors can be expected to escape into the workplace air. PERSONAL PROTECTIVE EQUIPMENT EYES AND FACE: Face shield, safety glasses with side shield or chemical splash goggles. When working with molten material, face shield is recommended. SKIN: Rubber, chemical resistant gloves. When material is heated, wear gloves to protect against thermal burns. RESPIRATORY: Not normally needed in well ventilated areas. If the ventilation is insufficient to remove smoke from soldering processes, use NIOSH/MSHA approved cartridge type respirator. PROTECTIVE CLOTHING: Protective clothing and safety shoes as necessary to minimize contact. WORK HYGIENIC PRACTICES: Good personal hygiene practices should be used. Wash after any contact, before eating, and at the end of the work period. OTHER USE PRECAUTIONS: Eye wash station and quick drench safety shower in immediate work area. Page 4 of 6 9. PHYSICAL AND CHEMICAL PROPERTIES ODOR: Odorless. APPEARANCE: Metal (pellets) COLOR: Metallic gray. FLASH POINT AND METHOD: N/A FLAMMABLE LIMITS: N/A AUTOIGNITION TEMPERATURE: N/A VAPOR PRESSURE: Not Determined VAPOR DENSITY: Not Applicable BOILING POINT: 1650 C (3000 F) MELTING POINT: 268 C (514.4 F) to 299 C (570.2 F) SOLUBILITY IN WATER: Insoluble 10. STABILITY AND REACTIVITY STABILITY: Stable under ordinary use and storage conditions. POLYMERIZATION: Will not occur. HAZARDOUS DECOMPOSITION PRODUCTS: None known. INCOMPATIBLE MATERIALS: Strong acids and strong oxidizers should be avoided TOXICOLOGICAL INFORMATION GENERAL COMMENTS: No toxicological information available at this time. 12. ECOLOGICAL INFORMATION GENERAL COMMENTS: No information on ecological toxicity or biodegradability is available at this time. 13. DISPOSAL CONSIDERATIONS DISPOSAL METHOD: Dispose of this material, contaminated absorbent material and other contaminated materials in an approved waste disposal facility, according to all applicable Federal, State, and Local regulations. Recovery and reuse, rather than disposal, should be the ultimate goal in handling efforts. 14. TRANSPORT INFORMATION DOT (DEPARTMENT OF TRANSPORTATION) PROPER SHIPPING NAME: Not regulated by DOT Page 5 of REGULATORY INFORMATION UNITED STATES SARA TITLE III (SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT) 311/312 HAZARD CATEGORIES: Chronic health hazard. 313 REPORTABLE INGREDIENTS: Lead CAS# (weight percentage can be determined from product label) TSCA (TOXIC SUBSTANCE CONTROL ACT) TSCA STATUS: All ingredients are listed or are exempt from listing (as polymers) on the Toxic Substances Control Act (TSCA) Chemical Substance Inventory. CALIFORNIA PROPOSITION 65: The following components are known to the State of California to cause cancer and/or reproductive toxicity and subject to warning and discharge requirements under the Safe Drinking Water and Toxic Enforcement Act of 1986. : Lead CAS# OTHER INFORMATION REASON FOR ISSUE: New format APPROVED BY: P. Han PREPARED BY: J. Saleda-Layton TITLE: Technical Director INFORMATION CONTACT: (630) REVISION SUMMARY: This MSDS replaces the 2/18/2013 MSDS. Revised: Section 1: REASON FOR ISSUE. Section 2:. HMIS RATING HEALTH 2 FLAMMABILITY 0 PHYSICAL HAZARD 0 PERSONAL PROTECTION X MANUFACTURER DISCLAIMER: The information contained herein is based upon data considered to be accurate and is offered solely for information, customer consideration and investigation. The manufacturer extends no warranties, makes no representations and assumes no responsibility as to the accuracy, completeness or suitability of this data for any purchaser's use. The content of this Material Safety Data Sheet relates only to this product as sold and does not relate to use with any other material or in any process. All chemical products should be used only by, or under, the direction of technically qualified personnel, who are aware of the hazards involved and of the necessity for reasonable care in handling. Hazard communication regulations, United States Occupational Health and Safety (OSHA) and Canadian Workplace Hazardous Materials Information System Page 6 of 6 (WHMIS) require that employees must be trained in the use of Material Safety Data Sheets as a source of hazards information and response.
View more...
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks