Personal Navigation System User Manual - PDF

Please download to get full document.

View again

of 5
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information Report
Category:

Legal forms

Published:

Views: 3 | Pages: 5

Extension: PDF | Download: 0

Share
Related documents
Description
TM Personal Navigation System User Manual Copyright 2005, GPS Receiver Battery LED GPS LED Bluetooth LED Power On Press power button 1 sec. until the LED is on. Off Press power button
Transcript
TM Personal Navigation System User Manual Copyright 2005, GPS Receiver Battery LED GPS LED Bluetooth LED Power On Press power button 1 sec. until the LED is on. Off Press power button 1 sec. until the LED is off. Bluetooth LED Flashing Slowly No connection to Bluetooth device. Flashing Quickly Connected to other Bluetooth device. GPS LED Solid Green The GPS is searching for satellites. Flashing Green The GPS position has fixed. Battery LED Red The battery is low and requires charge. Yellow The battery is charging. LED off The battery is fully charged. Package Contents Bluetooth GPS receiver x 1 Battery x 1 AC Charger x 1 Car Charger x 1 User CD x 1 Setting up Your Bluetooth GPS The instruction is provided as a general guideline. The steps may be different on your particular device. Please refer to user manual of each device for more detailed information. Pocket PC * Make sure Bluetooth is enabled on the Pocket PC. 1. Open Bluetooth Manager by clicking on Bluetooth Manager icon. 2. Select New - Connect! to start Connection Wizard. 3. Highlight Explore a Bluetooth device and click Next. 4. Select Tap here to choose a device and click Next. 5. Bluetooth wizard will search and display available Bluetooth devices on screen. 6. Click on BT GPS icon and available service will display. 7. Enter 0000 as passkey. 8. Select SPP Slave and click Next. 9. Select Finish and BT GPS will now available as short cut. Palm OS 1. Click on Bluetooth icon to start Bluetooth Manager. 2. Make sure Bluetooth is selected to On. 3. Click on Setup Devices and then click on Trusted Devices. 4. Click on Add Devices to search for available devices. 5. Click on Bluetooth GPS and enter 0000 as passkey. Windows 1. From Desktop, click on My Bluetooth Places icon to open Bluetooth Manager. 2. Click on Search for devices in range to search all available Bluetooth devices. 3. Enter 0000 as passkey and BT GPS icon should be displayed. 4. Right click and select Connect SPP Slave. 5. The Bluetooth connection will be established and BT GPS icon will become green. MAC OS X 1. Go to System Preferences and click on the Bluetooth icon. 2. Click on settings to ensure BT is turned on and discoverable. 3. Select the Devices tab. 4. Click on set up new device. 5. This brings up the Bluetooth Set Up Assistant 6. Follow the instructions on the set up assistant and enter 0000 as passkey. 7. The device should be listed in the devices window. 8. Locate the BT serial utility application in the utilities folder, double click to open 9. Click on new 10. Assign the port a name, select outgoing, click on select device. 11. Select the Bluetooth GPS and highlight SPP slave in the right hand window. 12. Click select button and select the port type RS Click OK to finish setup. Setting up Your Software Every navigation software has different setup instruction. Please refer to the user manual of each respective program for detail setup information. Below are some useful tips. Protocol The default protocol on i.trek M3 Bluetooth GPS is NMEA and majority of the navigation software also uses NMEA as standard protocol. We recommend keeping this setting at default. Baud Rate 4800 is the most common baud rate used by navigation software, and we recommend keeping this value. However, if 4800 does not work, we recommend switching the baud rate to Com Port Com port is assigned by Bluetooth Manager automatically. If several choices are available, please make sure the software uses the com port which has been assigned to serial port (out bound). Connection Some software offer several choices for GPS connection. Please make sure connection method is set to Bluetooth. FAQ and Trouble Shooting Does BT GPS require driver? No, BT GPS does not require driver to run. As long as the host device supports Bluetooth and serial profile, it will recognize BT GPS through discovery mode. The BT GPS is successfully paired through Bluetooth Manager. However, the GPS mapping software can not recognize the BT GPS. Only one program can access the GPS at one time. Please make sure all GPS programs are turned off except for one you intend to use. The BT GPS has received satellite signals. However, it can not acquire a fix. GPS stores the satellite data in the internal memory. If you have not used GPS for a while or have traveled a long distance, please remove the battery for a while and let the GPS reset. The BT GPS takes long time to get a fix. When you first use the GPS, please make sure that you are outside with good view of the sky and stay stationary. It may take about few minutes to locate the satellites for the first time. However, it will locate much faster during the subsequent uses. The BT GPS can not be paired after the battery is completely drained. When the battery is completed drained, the unique paring ID is lost. Please delete the BT GPS short cut and the paired device from the Bluetooth manager, restart the host device, and repair the BT GPS again. How long is the warranty and where to exchange the defective product? The warranty is one year from the date of purchase. Replacement will be issued directly by your authorized dealer. Technical Specifications Antenna Receiver Frequency: Antenna Type: MHz (L1 band) C/A code Built-in Active Antenna GPS Receiver Technology: SiRF star III Satellite Measure Used: 20-channel parallel automatic selection Tracking Sensitivity: -159 dbm Operating Temperature: -20 C to 60 C Battery Life: 15 hours with built-in rechargeable battery (1650 mah) Time to First Fix (TTFF) Reacquisition: 0.1 second typical Hot Start: 1 seconds typical Warm Start: 38 seconds typical Cold Start: 42 seconds typical Accuracy of Position Fix Horizontal: 10m 2D RMS without SA Velocity: 0.1/sec 95% without SA Receiver Configuration Baud Rate: Update rate: Output Message: RMC 38400; 8, N, 1 by default Once every seconds NMEA 0183 version: 2.20, supports commend GGA, GSA, GSV, Physical Characteristics Dimension: 72.5 x 40.4 x 26mm Weight: 75g
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks
SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!

x