PC Hardware Servicing LM | Computer Data Storage | Hard Disk Drive

Please download to get full document.

View again

of 113
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information Report
Category:

Documents

Published:

Views: 2 | Pages: 113

Extension: PDF | Download: 0

Share
Related documents
Description
lm material tle
Transcript
    K to 12 Basic Education Curriculum Technology and Livelihood Education Learning Module COMPUTER H RDW RE SERVICING   EXPLORATORY COURSE Grade 7 and Grade 8    Republic of the Philippines DEPARTMENT OF EDUCATION  COMPUTER HARDWARE SERVICING 1 K to 12 –  Technology and Livelihood Education  TABLE OF CONTENTS  What Is This Module About? .................................................................................... 2 How Do You Use This Module ............................................................................... 3 LESSON 1  –   Use Hand Tools ........................................................................ 4  –   30 LESSON 2  –   Perform Mensuration and Calculation ................................ 31  –   46 LESSON 3  –  Prepare and Interpret Technical Drawing ............................ 47  –   63 LESSON 4  –   Practice Occupational Safety and Health ............................. 64 - 103  Answer Keys .................................................................................................. 104 - 111  Acknowledgment ..................................................................................................... 112  COMPUTER HARDWARE SERVICING 2 K to 12 –  Technology and Livelihood Education Welcome to the world of Computer Hardware Servicing! This Module is an exploratory course which leads you to Computer Hardware Servicing  National Certificate Level II ( NC II) 1 . It covers the 4 common competencies that a Grade 7 / Grade 8 Technology and Livelihood Education (TLE) student like you ought to possess, namely: 1) Using hand tools; 2) Performing mensuration and calculation; 3) Preparing and interpreting technical drawing; and 4) Practicing occupational health and safety procedures. These 4 common competencies are covered separately in 4 Lessons. As shown below, each Lesson is directed to the attainment of two or more learning outcomes: Lesson 1  –   Use Hand Tools Learning Outcome (LO) 1 - Prepare hand tools Learning Outcome (LO) 2- Use appropriate hand tools and test equipment Learning Outcome (LO) 3 - Maintain hand tools Lesson 2  – Perform Calculation and Mensuration Learning Outcome (LO) 1 - Select components to be measured  Learning Outcome (LO) 2 - Carry out measurements and calculation Lesson 3  – Prepare and Interpret Technical Drawing  Learning Outcome (LO) 1 - Identify different kinds of technical drawing  Learning Outcome (LO) 2 - Interpret technical drawing  Lesson 4  – Practice Occupational Health and Safety Procedures Learning Outcome (LO) 1 - Identify hazards and risks  Learning Outcome (LO) 2 - Evaluate hazards and risks  Learning Outcome (LO) 3 - Control hazards and risks Your success in this exploratory course on Computer Hardware Servicing  is shown in your ability to perform the performance standards found in each learning outcome. 1  NATIONAL CERTIFICATE (NC) is a certification issued to individuals who achieved all the required units of competency for a national qualification as defined under the Training Regulations. NCs are aligned to specific levels within the PTQF. (TESDA Board Resolution  No. 2004-13, Training Regulations Framework)  NATIONAL CERTIFICATE LEVEL refers to the four (4) qualification levels defined in the Philippine TVET Qualifications Framework (  PTQF  ) where the worker with: a.  NC I  performs a routine and predictable tasks; has little judgment; and, works under supervision; b.  NC II  performs prescribed range of functions involving known routines and procedures; has limited choice and complexity of  functions, and has little accountability; What Is This Module About?  COMPUTER HARDWARE SERVICING 3 K to 12 –  Technology and Livelihood Education This Module has 4 Lessons. Each Lesson has the following parts.   Learning Outcomes   Performance Standards   Materials/Resources   Definition of Terms   What Do You Already Know?   What Do You Need to Know?   How Much Have You Learned?   How Do You Apply What You Learned?   How Well Did You Perform?   How Do You Extend Your Learning?   References To get the most from this Module, you need to do the following: 1. Begin by reading and understanding the Learning Outcome/s and Performance Standards. These tell you what you should know and be able to do at the end of this Module. 2. Find out what you already know by taking the Pretest then check your answer against the Answer Key. If you get 99 to 100% of the items correctly, you may proceed to the next Lesson. This means that you do not need to go through the Lesson because you already know what it is about. If you failed to get 99 to 100% correctly, go through the Lesson again and review especially those items which you failed to get. 3. Do the required Learning Activities. They begin with one or more Information Sheets. An Information Sheet contains important notes or basic information that you need to know.  After reading the Information Sheet, test yourself on how much you learned by answering the Self-check. Refer to the Answer Key for correction. Do not hesitate to go back to the Information Sheet when you do not get all test items correctly. This will ensure your mastery of basic information. 4. Demonstrate what you have learned by doing what the Activity / Operation /Job Sheet directs you to do. 5. You must be able to apply what you have learned in another activity or in real life situation. 6. Accomplish the Scoring Rubrics for you to know how well you performed. Each Lesson also provides you with references and definition of key terms for your guide. They can be of great help. Use them fully. . How Do You Use This Module? If you have questions, ask your teacher for assistance.
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks