Loctite Hysol Hot Melt Adhesives and Dispensing Equipment A Complete Line of Hot Melt Solutions. The Right Size and Shape - PDF

Please download to get full document.

View again

of 16
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information Report
Category:

Calendars

Published:

Views: 4 | Pages: 16

Extension: PDF | Download: 0

Share
Description
Loctite Hysol Hot Melt Adhesives and Dispensing Equipment A Complete Line of Hot Melt Solutions Henkel has expanded its Loctite Hysol Hot Melt offerings to include a complete line of adhesives, hand held
Transcript
Loctite Hysol Hot Melt Adhesives and Dispensing Equipment A Complete Line of Hot Melt Solutions Henkel has expanded its Loctite Hysol Hot Melt offerings to include a complete line of adhesives, hand held dispensers, and a new line of bulk Hot Melt equipment. Hot Melt adhesives offer many benefits _ from open times ranging from to minutes, eliminating the need for clamps or fixtures, to long-term durability and excellent resistance to moisture, chemicals, oils, and temperature extremes. Unlike many solvent and waterbased adhesives, all Hysol Hot Melt adhesives are non-toxic and 100% usable, reducing waste disposal and worker safety concerns. The Right Size and Shape Hot Melt adhesives are designed to fit commercially available hand held applicators and bulk systems. The various sizes and shapes of Hysol Hot Melt adhesives are cast or extruded to exacting tolerances for smooth, reliable dispensing. All sizes and shapes of Hysol Hot Melt formulations are available in bulk configurations for use with the new line of high performance bulk dispensers. Whatever your application requires, there s a Loctite Hysol Hot Melt product to meet your specific performance requirements. Hot Melt Adhesives Loctite Hysol Hot Melt Adhesives were developed to bond a variety of substrates, including difficult-to-bond plastics. These adhesives can handle today s toughest applications in a broad range of industries. Hysol Hot Melts are ideal for applications that require high-speed manufacturing, bonding versatility, very large gap filling, fast green strength, and minimal shrinkage. Hysol products are solvent-free, environmentally friendly materials with no harmful VOCs. EVA Based Adhesives Loctite 1X TM Hysol Medium to fast setting, recommended for bonding paper, wood, fabric, and foam. Loctite 3X TM Hysol Polyshot TM Formulated for bonding sand molds and other porous substrates. Loctite 232 TM Hysol Medium setting adhesive, with an open time of 15. Loctite 236 TM Hysol Clear, toughened, flexible adhesive with superior wetting properties. Loctite 1942 TM Hysol Medium setting, general purpose hot melt adhesive. Excellent adhesion to wood and many plastics. Loctite 0420 TM Hysol SprayPac Polyshot TM Formulated for spray applications. Has an open time of 2 minutes when sprayed and 45 when bead applied. Loctite 0430 TM Hysol SprayPac Polyshot TM Formulated for spray applications. Suitable for bonding expanded polystyrene, polyethylene, and urethane foams. Can be used in applications where solvent-based aerosols are used. Loctite 0437 TM Hysol SprayPac Bulk material formulated to be spray applied to a wide variety of substrates. Loctite 0450 TM Hysol SprayPac Polyshot TM Formulated for spray application. Well suited for use on expanded polystyrene or urethane foams. Loctite 0452 TM Hysol SprayPac Bulk material formulated to be spray applied to a wide variety of substrates. Excellent for bonding expanded polystyrene or urethane foams. Loctite CoolMelt TM Hysol Flexible material designed to be applied at low temperatures. Ideal for bonding heat sensitive parts. Loctite QuikPac TM Hysol Fast setting material with a 15 second open time. Loctite SuperPac TM Hysol A medium setting material, it is formulated to bond cardboard and foams. Loctite WaxPac TM Hysol Medium setting flexible material formulated to bond wax-coated substrates and withstand low temperatures. Reactive Urethane Adhesives Loctite 3631 TM Hysol Urethane A toughened, high-strength adhesive for use on plastics. Flexible bond with an open time of 60. Polyolefin Based Adhesives Loctite 3650 TM Hysol Polyolefin A general purpose adhesive. Open time of Loctite 3651 TM Hysol Polyolefin Ideal for polyethylene and polyolefin plastics. Long open time of Polyamide Based Adhesives Loctite 7460 TM Hysol SprayPac Polyshot TM Polyamide High heat resistance and fast set time. Suitable for bonding foams, fabric, and wood. Available in bead or spray. Loctite 7500 TM Hysol SprayPac Polyshot TM Polyamide Formulated for long open time and high output, for bonding surfaces up to 15 square feet. Available in bead or spray. Loctite 7809FR TM Hysol Polyamide Polyamide modified with fire retardant materials. It has a UL 94V-O flammability rating. Loctite 7811 TM Hysol Polyamide Exceptional high temperature resistance and impact at low temperatures. Loctite 7901 TM Hysol Polyamide Low viscosity polyamide used extensively for potting and encapsulating. 1 PROPERTIES CHART PRODUCT Item Number Container Color Viscosity cp at Temperature F Tensile Strength (psi) Open Time Temperature Resistance ASTM D4498 % Elongation Hardness (Shore A) Key Specifications 1X Hysol Sample 5 lb. pellets Maxistick sample 7 oz. bag Maxistick 35 lb. carton PT stick 35 lb. carton Ministick 35 lb. carton Superstick sample 10 5 oz. bag Superstick 10 25 lb. carton Superstick 4 25 lb. carton Polyshot 12 oz. bag Light yellow 2, F X Hysol Polyshot sample 12 oz. bag Amber 4, F Hysol Cream 8, F Hysol Superstick sample 10 5 oz. bag Superstick 10 25 lb. carton Superstick 4 25 lb. carton Polyshot sample 12 oz. bag Light yellow 9, F O420 Hysol SprayPac oz. sample bag Cream 10,500 2 minutes sprayed 153 F O430 Hysol SprayPac Polyshot 12 oz. sample bag Cream 5, minutes sprayed 170 F Red Hysol SprayPac Polyshot 12 oz. sample bag Pink 5, minutes sprayed 170 F 75 EVA'S O437 Hysol SprayPac O450 Hysol SprayPac lb. carton bricks 21 lb. carton pucks Polyshot 12 oz. sample bag Cream Natural 5,200 4, minutes sprayed 5-8 minutes 170 F 156 F 75 O450 Red Hysol SprayPac Polyshot 12 oz. sample bag Pink 4, minutes 156 F 0452 Hysol SprayPac lb. pucks 36 lb. bricks Natural 4, minutes 156 F 1942 Hysol lb. sample bag pellets Maxistick sample 7 oz. bag Maxistick 35 lb. carton PT stick 35 lb. carton Ministick 35 lb. carton Superstick sample 10 5 oz. bag Superstick 10 25 lb. carton Superstick 4 25 lb. carton Polyshot sample 12 oz. bag Tan 5, F Hysol PT stick sample 8 oz. bag Superstick 10 25 lb. carton Amber 3, F CoolMelt Hysol CoolMelt Maxistick sample 7 oz. bag CoolMelt Maxistick 35 lb. carton Off white 7, F 800 SuperPac Hysol Maxistick sample 7 oz. bag Maxistick 35 lb. carton Polyshot sample 12 oz. bag Light yellow 5, F 200 QuikPac Hysol QuikPak sample pellets 5 lb. bag Maxistick sample 7 oz. bag Maxistick 35 lb. carton Polyshot sample 12 oz. bag Light yellow 4, F WaxPac Hysol Maxistick sample 7 oz. bag Maxistick 35 lb. carton Polyshot sample 12 oz. bag Light yellow 2, F 2 PROPERTIES CHART PRODUCT Item Number Container Color Viscosity cp at Temperature F Tensile Strength (psi) Open Time Temperature Resistance ASTM D4498 % Elongation Hardness (Shore A) Key Specifications POLYAMIDES POLYOLEFINS URETHANES EVA ' S 232 Hysol 236 Hysol 740LV Hysol 3631 Hysol 3650 Hysol 3651 Hysol 7460 Hysol SprayPac 7500 Hysol SprayPac 7804 Hysol 7804FRM-HV Hysol lb. sample bag pellets Maxistick 35 lb. carton Superstick 10 sample 5 oz. bag Superstick 10 25 lb. carton Polyshot sample 12 oz. bag Superstick sample 10 5 oz. bag Superstick 10 25 lb. carton 300 ml cartridge 5 gallon pail 20 kg pellets 10 kg pellets 12 kg squares Polyshot 25 lb. pail Polyshot 200 lb. drum Sample 13 oz. bag Polyshot sample 13 oz. bag Polyshot 25 lb. pail 330 lb. drum pellets 5 lb. bag sample pellets Superstick sample 10 5 oz. bag Superstick 10 32 lb. carton Polyshot sample 13 oz. bag Polyshot 25 lb. pail 5 lb. bag pellets Superstick 10 sample 5 oz. bag Superstick 10 30 lb. pail Polyshot sample 13 oz. bag Clear Clear Light yellow Off white Light beige Beige Pale/ Amber Pale/ Amber Amber Off white 11,000 8,500 3,500 12, , , ,700 1,900 7,500 6, , , minutes F 140 F 215 F *250 F *176 F *266 F 210 F 200 F 220 F 220 F None None None UL 94V-O 7809FR Hysol lb. bag sample pellets Superstick sample 10 13 oz. bag Polyshot 13 oz. bag Superstick 10 32 lb. carton Polyshot 25 lb. pail Amber 7, F UL 94V-O 7811 Hysol lb. bag sample pellets Polyshot sample 13 oz. bag Polyshot 25 lb. pail Amber 6, F 1, None 7901 Hysol lb. bag sample pellets Polyshot sample 13 oz. bag Polyshot 25 lb. pail Amber F None *Creep Test. HOT MELT STICK REFERENCE CHART Description Diameter Length/Weight Loctite Hand Held Applicators by Item No. Superstick.50 4 /11 g, 10 /27 g 98030, 98031, 98032, Maxistick.75 2.4 /14 g 98033, Polyshot 1.75 1.5 /56 g 98035, 98036, 98040, 98037, Hand Held Applicators Applicators are state of the art dispensing units designed for the application of hot melt adhesives. These units combine ergonomics, user-friendly design, and reliability. Selection of a Loctite Hot Melt Applicator should be based on the type of hot melt being used, stick diameter, and process requirements Reactive Urethane Cartridge Dispenser The Reactive Urethane Cartridge Dispenser for 300 ml cartridges is used to manually dispense dots or beads of Loctite Hysol Reactive Polyurethane Hot Melts. With a fixed dispense temperature set at 250 F, this system includes a pressure-regulating stand with optional vertical application stand and foot switch for hands-free application. Using a cartridge keeps the product isolated from the reservoir to eliminate contamination. To minimize cartridge change over times, the Loctite Cartridge Pre-Heater is recommended. See the Hand Held Nozzles & Accessories Selector Chart LITE Hot Melt Applicator The 050-LITE Hot Melt Applicator is a hand held applicator used for dispensing 0.50 diameter EVA sticks. The operating temperature of the unit is set at 200 C. This applicator weighs less than a pound, and is ideal for hobby, craft, and light duty industrial applications. A wire stand and nozzle are included /98031 Loctite Hysol 050/Hysol 050-HT Hot Melt Applicator The 050 and 050-HT Hot Melt Applicators are industrial grade, hand held applicators used for dispensing 0.50 diameter sticks. The Hysol 050 is set at 195 C for dispensing EVA hot melts and the Hysol 050-HT is set at 215 C for dispensing polyamide hot melts GAS Hot Melt Applicator The 050- GAS Hot Melt Applicator is an industrial grade, hand held, cordless system used for dispensing 0.50 diameter EVA sticks. There is no electrical utility requirement, as butane gas is used as the source of energy. The operating temperature of the unit is set at 195 C. Designed for use where the application of 0.50 diameter EVA hot melts is desired, this dispenser is ideally suited for outdoor and indoor applications, where access to electrical power is not practical. 4 98033/ /Hysol 075-LT Hot Melt Applicator The 075 and 075-LT Hot Melt Applicators are industrial grade, hand held applicators, and are the industry's price leaders where high volumes of 0.75 diameter hot melts are required. The Hysol 075 is set at 182 C for dispensing standard EVA hot melts. The Hysol 075-LT is set at 121 C for dispensing Coolmelt EVA sticks, to reduce the risk of operator burns over conventional applicators. It is ideally suited for applications requiring rapid dispensing where frequent re-loading is undesirable Hot Melt Applicator The 175 Hot Melt Applicator is an industrial grade, hand held applicator. This applicator is designed for use where medium-to-high volume, manual application of Loctite Hysol 1.75 diameter EVA and Polyamide hot melts are desired. The applicator includes a plug-in thermostat at 195 C for EVA hot melts and a plug-in thermostat at 215 C for polyamide hot melts. It is ideally suited for applications requiring rapid dispensing where frequent re-loading is undesirable / AIR/Hysol 175-AIR HT Hot Melt Applicators The 175- AIR and 175-AIR HT Hot Melt Applicators are industrial grade, hand held pneumatic applicators used for dispensing Loctite Hysol 1.75 diameter EVA and Polyamide hot melt sticks, where medium-to-high volume, pneumatically powered applications are desired. The Hysol 175-AIR is set at 195 C for dispensing EVA hot melts and the Hysol 175-AIR HT is set at 215 C for dispensing polyamide hot melts. They are ideally suited for applications requiring rapid hand held dispensing where frequent re-loading is undesirable / SPRAY/Hysol 175 SPRAY HT Applicators The 175-SPRAY and 175-SPRAY HT Hot Melt Applicators are patented, industrial grade, hand held pneumatic applicators used for spraying 1.75 diameter EVA and Polyamide spray sticks. These applicators are designed to rapidly cover a large area with a hot melt adhesive. They are commonly used to replace duct tape, staples, beads of adhesives, and other fastening techniques for large areas. The Hysol 175-SPRAY is set at 180 C for dispensing EVA hot melts and the Hysol 175-SPRAY HT is set at 195 C for dispensing polyamide hot melts Loctite Hysol Wheelcoater The Wheelcoater is a bulk hot melt adhesive transfer machine used to apply a continuous film of hot melt adhesive to the surface of a part. The Wheelcoater is ideally suited for any application where a large, flat surface requires the rapid application of a hot melt adhesive. Typical examples are protective foam inserts for cardboard boxes and other packaging, wood/plastic panels, etc Loctite Hot Melt Bench Mount Kit Loctite Hot Melt Pneumatic Timer The Loctite Hot Melt Bench Mount Kit is used for converting the 175-AIR or 175-AIR HT applicator into a hands-free, bench-top dispenser. The Loctite Hot Melt Pneumatic Timer is used in conjunction with the Hot Melt Bench Mount Kit and Loctite Hysol 175-AIR/AIRHT applicator for controlled dot dispensing. These units are used for any hot melt application where holding an applicator is not desirable. This is especially relevant to applications where the part itself must be moved. Typical applications include: cardboard boxes and related packaging materials, wood and plastic panels, furniture components, etc. 5 Hand Held Applicators Reactive 050/ 075/ Urethane Cartridge Dispenser 050-LITE 050-HT 050-GAS 075-LT 175 Item # / / Nominal Stick N/A 0.50 0.50 0.50 0.75 1.75 Diameter (Supersticks ) (Supersticks ) (Supersticks ) (Maxisticks ) (Polyshot sticks) Dispense Melt / / Rate (lbs./hr.) Applicator Adh. 300 ml Capacity (lbs.) Heat Source Electric Electric Electric Butane Electric Electric Dispense Air Manual Manual Manual Manual Manual Power Dispense / / & 215* Temp. ( C) Hot Melt Reactive EVA/ EVA/ Polyamide/ EVA/ EVA/ EVA & Chemistry Urethane Polyolefin Polyolefin Polyolefin EVA CoolMelt Polyamide Loctite Bench Mount 175-AIR 175-AIR HT 175-SPRAY 175-SPRAY HT Wheelcoater Kit & Pneumatic Timer Item # /98043 Nominal Stick 1.75 1.75 1.75 (SprayPac 1.75 (SprayPac Bulk and N/A Diameter (Polyshot sticks) (Polyshot sticks) Polyshot sticks) Polyshot sticks) Stick Form Dispense Melt N/A N/A Rate (lbs./hr.) Applicator Adh N/A Capacity (lbs.) Heat Source Electric Electric Electric Electric Electric N/A Dispense Air Air Air Air Electric N/A Power Dispense N/A Temp. ( C) Hot Melt EVA Polyamide EVA Spray Polyamide Spray EVA EVA/ Chemistry Adhesive Adhesive Bulk/Sticks Polyamide *The 175 applicator (manual electric) is supplied with both temperature modules. 6 Loctite Brand Hand Held Nozzles & Accessories Selector Chart Product Item # Description Used With Standard 1-Hole Nozzle, 98030, 98031, 98032, 0.08 Diameter Cone Tip, 98033, 98034, 98035, 5 pk 98036, Hole Nozzle, 98030, 98031, 98032,.06 dia. x.39 spacing 98033, 98034, 98035, 98036, Hole Nozzle, 98030, 98031, 98032,.06 dia. x.20 spacing 98033, 98034, 98035, 98036, Diagonal Extension Nozzle, 98030, 98031, 98032, Tip =.14 dia. x 1.23 long 98033, 98034, 98035, 98036, Needle Extension Nozzle, 98030, 98031, 98032, Tip =.05 dia. x 1.32 long 98033, 98034, 98035, 98036, Spreader Extension Nozzle, 98030, 98031, 98032, Tip = (.09 x.25 ) 98033, 98034, 98035, sq. x 1.32 long 98036, L-Nozzle,.06 dia. x 98033, 98034,.85 offset 98035, 98036, T-Nozzle, 98033, 98034, 98035,.06 dia. x 1.5 spacing 98036, Standard Adapter/Check 98030, 98031, Valve for Nozzles 98032, 98035, 98036, ANZ023N01 Standard Adapter/ 98033, Check Valve/Jam Nut for Nozzles Ultra Wide Spray Nozzle, 98037, - 6.0 dia. pattern Product Item # Description Used With Cartridge Pre-heater, holds (2) 300 ml cartridges Standard adapter for ml Cartridges Standard 1-Hole Nozzle, dia. cone tip, with integral check valve (Includes protective cap) Injection Needle Nozzle, with Integral Check Valve, Tip =.059 dia. x.197 long Adapter/Check Valve for Specialty Nozzles Needle Jet Nozzle, Tip =.051 dia. x 1.26 long (Requires adapter) Diagonal Extension Nozzle, Tip =.123 dia. x 1.276 long (Requires adapter) Flat Spreader Nozzle, Tip = (.084 x.177 ) sq. x long (Requires adapter) Hole Nozzle, dia. x.39 spacing (Requires adapter) Hole Nozzle, dia. x.20 spacing (Requires adapter) Narrow Spray Nozzle, 98037, dia. pattern Standard Wide Spray 98037, Nozzle, 1.25 - 5.0 dia. pattern Standard 1-Hole Nozzle, with Integral Check Valve, Tip =.10 dia. x.16 long Pencil Point Nozzle, with Integral Check Valve, Tip =.08 dia. x.24 long Precision Nozzle, with Integral Check Valve, Tip =.05 dia. x.20 long Extension Nozzle, with Integral Check Valve, Tip =.10 dia. x.50 long Spreader Nozzle, with Integral Check Valve, Tip = (0.08 x 0.25 ) sq. x 0.47 long Tool Hanger/Balancer All Hot Melt Hand Held Applicators Air Line Filter, All Pneumatic Regulator, Gauge Applicators psi Heavy Duty Bench Top 98030, 98031, Metal Stand 98032, 98035, 98036, 98037, 98040, For custom hot melt dispense nozzles, contact the Loctite Special Equipment Group at LOCTITE ( ). 7 Bulk Hot Melt Systems Henkel introduces a line of Bulk Hot Melt Dispensers offering high performance control and reliability for all of your hot melt dispensing needs. You can rely on Henkel to supply your performance hot melt adhesives as well as an array of standard high volume hot melt dispensing equipment. Henkel offers true one stop shopping for your complete adhesive solution. All of the required system options are outlined in the following pages and are readily available for integration into your specific application. Tested and proven with all of the Loctite hot melt products, these units offer complete customization to meet your specific process needs. These units offer the following features: Compatible with all Loctite hot melt products High volume extrusion, spray or swirl options in all tank sizes Can be integrated with optional stand alone controllers or programmable logic controllers for various levels of automation and high process control Complete line of accessories Tank Pump System available in 12, 14, or 34 lb. capacity. Available in 115 VAC or 230 VAC Hand held and mountable applicators for process integration flexibility Multiple zone temperature control to optimize product stability AND processibility Automated or manual applicators available for extrusion, spray or swirl pattern Multiple dispense ports PTFE lined stainless steel reinforced braided hoses, available in 4' through 24' lengths 8 The Bulk Hot Melt Systems come in three compact and economical sizes: 12, 14 and 34 pound tank capacity (expandable to up to 78 pounds with optional tank hopper). All units feature internal system diagnostics, which monitor the temperatures and system settings. These diagnostics automatically control the distribution of power, ensuring that the system reaches application temperature efficiently. This protects the pump from premature operation, resulting in safe, fast, and reliable operation for your production requirements. Bulk Hot Melt Systems accommodate all Loctite Hysol EVA, Polyamide and Polyolefin hot melt adhesives. All units share these performance features: PTFE coated reservoir reduces tank residue High surface area melt grid is integrated with tank walls to ensure fast and even heating, eliminating hotspots within the tank All system settings and system diagnostics are visible on front display for at a glance system status Gear pump for the most consistent product delivery pressure All systems are CE Certified Bulk-12 System 98131/98132 Single hose, applicator design Pressure adjustable, electric AC gear pump Three controllable temperatur
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks
SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!

x