ATV71HU55N4 variable speed drive ATV71-5.5kW 7.5HP - 480V - PDF

Please download to get full document.

View again

of 5
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information Report
Category:

Reviews

Published:

Views: 11 | Pages: 5

Extension: PDF | Download: 0

Share
Related documents
Description
Product data sheet Characteristics ATV71HU55N4 variable speed drive ATV71-5.5kW 7.5HP - 480V Product availability: Stock - Normally stocked in distribution facility Price*: USD Complementary Product
Transcript
Product data sheet Characteristics ATV71HU55N4 variable speed drive ATV71-5.5kW 7.5HP - 480V Product availability: Stock - Normally stocked in distribution facility Price*: USD Complementary Product destination Supply voltage limits Aug 8, 2013 Main Commercial Status Commercialised Range of product Altivar 71 Product or component type Product specific application Component name Motor power kw Motor power hp Motor cable length [Us] rated supply voltage Network number of phases Line current EMC filter Assembly style Apparent power Prospective line Isc Nominal output current Maximum transient current Speed drive output frequency Nominal switching frequency Switching frequency Asynchronous motor control profile Type of polarization Asynchronous motors Synchronous motors V Supply frequency Hz ( %) Network frequency limits Speed range Hz Variable speed drive Complex, high-power machines ATV kw at V 3 phases 7.5 hp at V 3 phases = 100 m unshielded cable = 50 m shielded cable V ( %) 3 phases 20.3 A for 380 V 3 phases 5.5 kw / 7.5 hp 17 A for 480 V 3 phases 5.5 kw / 7.5 hp Integrated With heat sink 13.4 kva at 380 V 3 phases 5.5 kw / 7.5 hp = 22 ka, 3 phases 14.3 A at 4 khz 380 V 3 phases 5.5 kw / 7.5 hp 11 A at 4 khz 460 V 3 phases 5.5 kw / 7.5 hp 23.6 A for 2 s 3 phases 5.5 kw / 7.5 hp 21.5 A for 60 s 3 phases 5.5 kw / 7.5 hp Hz 4 khz khz with derating factor khz adjustable ENA (Energy adaptation) system for unbalanced loads Flux vector control (FVC) with sensor (current vector) Sensorless flux vector control (SFVC) (voltage or current vector) Voltage/Frequency ratio (2 or 5 points) No impedance for Modbus for synchronous motor in open-loop mode, without speed feedback for asynchronous motor in closed-loop mode with encoder feedback for asynchronous motor in open-loop mode, without speed feedback 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. *Prices are indicative Speed accuracy Torque accuracy Transient overtorque Braking torque Synchronous motor control profile Regulation loop Motor slip compensation Local signalling Output voltage Insulation Type of cable +/- 10 % of nominal slip for 0.2 Tn to Tn torque variation without speed feedback +/ % of nominal speed for 0.2 Tn to Tn torque variation in closed-loop mode with encoder feedback +/- 5 % in closed-loop mode with encoder feedback +/- 15 % in open-loop mode, without speed feedback 220 % of nominal motor torque +/- 10 % for 2 s 170 % of nominal motor torque +/- 10 % for 60 s every 10 minutes 30 % without braking resistor 150 % with braking or hoist resistor Vector control without speed feedback Adjustable PI regulator Adjustable Automatic whatever the load Not available in voltage/frequency ratio (2 or 5 points) Suppressable 1 LED red presence of drive voltage = power supply voltage Electrical between power and control Without mounting kit: 1-strand IEC cable at 113 F (45 C), copper 90 C XLPE/EPR Without mounting kit: 1-strand IEC cable at 113 F (45 C), copper 70 C PVC With an IP21 or an IP31 kit: 3-strand IEC cable at 104 F (40 C), copper 70 C PVC With a NEMA Type1 kit: 3-strand UL 508 cable at 104 F (40 C), copper 75 C PVC Electrical connection L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB terminal 6 mm² / AWG 8 AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR terminal 2.5 mm² / AWG 14 Tightening torque L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB lbf.in (3 N.m) / 26.5 lb.in AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR 5.31 lbf.in (0.6 N.m) Supply Analogue input number 2 Analogue input type Sampling duration Response time Internal supply, 24 V DC, voltage limits V, = 200 ma for overload and shortcircuit protection Internal supply for reference potentiometer (1 to 10 kohm), 10.5 V DC +/- 5 %, = 10 ma for overload and short-circuit protection AI2 software-configurable voltage V DC, input voltage 24 V max, impedance Ohm, resolution 11 bits AI2 software-configurable current ma, impedance 242 Ohm, resolution 11 bits AI1-/Al1+ bipolar differential voltage +/- 10 V DC, input voltage 24 V max, resolution 11 bits + sign LI6 (if configured as logic input) 2 ms, +/- 0.5 ms for discrete input(s) LI1...LI5 2 ms, +/- 0.5 ms for discrete input(s) Al2 2 ms, +/- 0.5 ms for analog input(s) AI1-/Al1+ 2 ms, +/- 0.5 ms for analog input(s) R2A, R2B 7 ms, tolerance +/- 0.5 ms for discrete output(s) R1A, R1B, R1C 7 ms, tolerance +/- 0.5 ms for discrete output(s) AO1 2 ms, tolerance +/- 0.5 ms for analog output(s) = 100 ms in STO (Safe Torque Off) Accuracy AO1 +/- 1 % for a temperature variation 60 C AI2 +/- 0.6 % for a temperature variation 60 C AI1-/Al1+ +/- 0.6 % for a temperature variation 60 C Linearity error AO1 +/- 0.2 % AI1-/Al1+, AI2 +/ % of maximum value Analogue output number 1 Analogue output type AO1 software-configurable voltage V DC, impedance 470 Ohm, resolution 10 bits AO1 software-configurable current ma, impedance 500 Ohm, resolution 10 bits AO1 software-configurable logic output 10 V = 20 ma Discrete output number 2 Discrete output type Minimum switching current R2A, R2B configurable relay logic NO, electrical durability cycles R1A, R1B, R1C configurable relay logic NO/NC, electrical durability cycles Configurable relay logic 3 ma at 24 V DC Maximum switching current R1, R2 on resistive load, 5 A at 30 V DC, cos phi = 1, R1, R2 on resistive load, 5 A at 250 V AC, cos phi = 1, R1, R2 on inductive load, 2 A at 30 V DC, cos phi = 0.4, R1, R2 on inductive load, 2 A at 250 V AC, cos phi = 0.4, 2 Discrete input number 7 Discrete input type PWR: safety input 24 V DC, impedance: 1500 Ohm conforming to ISO level d LI6: switch-configurable PTC probe 0...6, impedance: 1500 Ohm LI6: switch-configurable 24 V DC with level 1 PLC, impedance: 3500 Ohm LI1...LI5: programmable 24 V DC with level 1 PLC, impedance: 3500 Ohm Discrete input logic LI6 (if configured as logic input) positive logic (source), 5 V (state 0), 11 V (state 0) LI6 (if configured as logic input) negative logic (sink), 16 V (state 0), 10 V (state 0) LI1...LI5 positive logic (source), 5 V (state 0), 11 V (state 0) LI1...LI5 negative logic (sink), 16 V (state 0), 10 V (state 0) Acceleration and deceleration ramps Braking to standstill Protection type Insulation resistance Frequency resolution Communication port protocol Type of connector Physical interface Transmission frame Transmission rate Data format Number of addresses Method of access Marking Operating position Height Depth Width Product weight Option card Automatic adaptation of ramp if braking capacity exceeded, by using resistor Linear adjustable separately from 0.01 to 9000 s S, U or customized By DC injection Motor thermal protection Motor power removal Motor motor phase break Drive thermal protection Drive short-circuit between motor phases Drive overvoltages on the DC bus Drive overheating protection Drive overcurrent between output phases and earth Drive line supply undervoltage Drive line supply overvoltage Drive input phase breaks Drive break on the control circuit Drive against input phase loss Drive against exceeding limit speed 1 mohm at 500 V DC for 1 minute to earth Display unit 0.1 Hz Analog input 0.024/50 Hz CANopen Modbus Male SUB-D 9 on RJ45 for CANopen 1 RJ45 for Modbus on terminal 1 RJ45 for Modbus on front face 2-wire RS 485 for Modbus RTU for Modbus 9600 bps, bps for Modbus on front face 4800 bps, 9600 bps, bps, 38.4 Kbps for Modbus on terminal 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen 8 bits, odd even or no configurable parity for Modbus on terminal 8 bits, 1 stop, even parity for Modbus on front face for Modbus for CANopen Slave for CANopen CE Vertical +/- 10 degree in (295 mm) 7.36 in (187 mm) 6.89 in (175 mm) lb(us) (5.5 kg) Profibus DP V1 communication card Profibus DP communication card Overhead crane card Modbus/Uni-Telway communication card Modbus TCP communication card Modbus Plus communication card Interface card for encoder Interbus-S communication card I/O extension card Fipio communication card Ethernet/IP communication card DeviceNet communication card Controller inside programmable card CC-Link communication card 3 Environment Noise level Dielectric strength 55.6 db conforming to 86/188/EEC 5092 V DC between control and power terminals 3535 V DC between earth and power terminals Electromagnetic compatibility Voltage dips and interruptions immunity test conforming to IEC Radiated radio-frequency electromagnetic field immunity test conforming to IEC level 3 Electrostatic discharge immunity test conforming to IEC level 3 Electrical fast transient/burst immunity test conforming to IEC level 4 Conducted radio-frequency immunity test conforming to IEC level 3 1.2/50 µs - 8/20 µs surge immunity test conforming to IEC level 3 Standards EN class A group 2 EN environments 1 category C3 EN environments 2 category C3 EN/IEC EN/IEC IEC class 3C1 IEC class 3S2 UL Type 1 Product certifications CSA C-Tick GOST NOM 117 UL Pollution degree 2 conforming to EN/IEC IP degree of protection IP54 on lower part conforming to EN/IEC IP54 on lower part conforming to EN/IEC IP41 on upper part conforming to EN/IEC IP41 on upper part conforming to EN/IEC IP21 conforming to EN/IEC IP21 conforming to EN/IEC IP20 on upper part without blanking plate on cover conforming to EN/IEC IP20 on upper part without blanking plate on cover conforming to EN/IEC Vibration resistance 1.5 mm peak to peak (f = Hz) conforming to EN/IEC gn (f = Hz) conforming to EN/IEC Shock resistance 15 gn for 11 ms conforming to EN/IEC Relative humidity % without dripping water conforming to IEC % without condensation conforming to IEC Ambient air temperature for operation Ambient air temperature for storage Operating altitude F ( C) without derating F ( C) ft ( m) with current derating 1 % per 100 m = ft (1000 m) without derating Ordering and shipping details Category ATV71 460V 7.5 THRU 20HP DRIVES Discount Schedule CP4C GTIN Nbr. of units in pkg. 1 Package weight(lbs) Product availability Stock - Normally stocked in distribution facility Returnability Y Country of origin ID Contractual warranty Period 18 months 4 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Schneider Electric: ATV71HU55N4
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks
SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!

x