arxiv: v1 [cond-mat.mes-hall] 25 Feb PDF

Please download to get full document.

View again

of 15
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information Report
Category:

Art

Published:

Views: 0 | Pages: 15

Extension: PDF | Download: 0

Share
Related documents
Description
Quantum Oscillations from Surface Fermi-Arcs in Weyl and Dirac Semi-Metals Andrew C. Potter, Itamar Kimchi, and Ashvin Vishwanath Department of Physics, University of California, erkeley, CA 9472, USA
Transcript
Quantum Oscillations from Surface Fermi-Arcs in Weyl and Dirac Semi-Metals Andrew C. Potter, Itamar Kimchi, and Ashvin Vishwanath Department of Physics, University of California, erkeley, CA 9472, USA arxiv: v [cond-mat.mes-hall] 25 Feb 24 The surface states of Weyl semi-metals (SM s) consist of disjointed Fermi-arcs. This unusual surface-fermiology provides a fingerprint of the topological features of the bulk Weyl-phase. Using a combination of semiclassical and numerical methods, we show that, in contrast to naive expectation, there are closed magnetic orbits involving the open- surface Fermi-arcs. elow a critical field strength that depends on sample thickness, these orbits produce periodic quantum oscillations of the density of states in a magnetic field, enabling a variety of experimental probes of the unconventional Fermiarc surface states. The orbits are also essential for reproducing the bulk chiral anomaly in a finite slab. These results are then extended to the closely related and recently discovered 3D Dirac SM materials, including Cd 3As 2 and Na 3i, which are doubled copies of Weyl semi-metals protected by crystal symmetry. Despite the fact that the protecting crystal symmetry is broken by a surface, we show that Dirac materials can still host unconventional surface-states, which can be detected in quantum oscillations experiments. Weyl semi-metals (SMs) are three-dimensional materials for which the bulk band-gap closes at an even-number of discrete points (Weyl nodes) in the rillouin zone[, 2]. Near the Weyl nodes, electrons have relativistic dispersion ε k ±v k. Each Weyl node acts as a monopole or anti-monopole of erry-curvature, (i.e. a closed surface in momentum space surrounding a node will be pierced by ±2π erry flux) and is associated with a positive or negative chirality respectively. Consequently, 2D cross sections of the rillouin zone change Chern number by ± across each Weyl node, implying that a generic surface will exhibit surface states whose Fermi-surfaces consist of a set of open line-segments[ 3]. These Fermi-arcs connect pairs of bulk Weyl nodes with opposite chiralities and cannot be removed without annihilating the bulk Weyl nodes. Such unusual surface-fermiology would be impossible in a purely twodimensional system, whose Fermi-surface is necessariliy smooth, and cannot abrubtly terminate at a point within the rillouin zone. Consequently, the Fermi-arcs serve as a surface fingerprint of the topological character of the bulk band-structure, and it is interesting to ask how they might be experimentally observed. Traditionally, the most powerful methods of mapping out a material s Fermi-surface rely on periodic-in- quantum oscillations of the density of states in a magnetic field,. Such quantum oscillations require closed magnetic orbits for electrons at the Fermi-surface, which naively cannot arise from disjointed Fermi-arcs. This raises the interesting question: do Fermi-arcs lead to quantum oscillations? We answer this question in the affirmative by noting that, in a slab of Weyl semi-metal of finite-thickness, closed magnetic orbits can be obtained by traversing the Fermi-arc on the top surface and returning along the corresponding arc on the bottom surface. Using semiclassical methods, we find that such closed orbits can indeed lead to periodic-in- quantum oscillations of the density of states. Since the orbits involved require an electron a) b) y E k x k z + + k v c) v ν(ε) / sat - - y x Ω - FIG.. (a) Semiclassical orbit in a magnetic field along ŷ, involving surface states that gives rise to quantum oscillations in a finite thickness slab (shown in mixed real space in y and momentum space in x, z directions; inset shows corresponding real-space trajectory); (b) bulk andau level () spectrum for a + -chirality Weyl node, k denotes momentum along the direction of the field; (c) periodic-in-/ features in the density of states resulting from quantizing the orbits shown in (a). The train of peaks ends at a saturation field sat which scales inversely with the sample thickness. to traverse the bulk in order to connect top and bottom surfaces, the oscillations only occur up to a critical field strength which depends on slab thickness. For larger fields, the orbits no longer produce periodic quantum oscillations, but are important for understanding the fate of the bulk chiral andau-levels (s) and associated chiral anomaly in finite systems. The semiclassical results are then validated by direct numerical simulation of the spectrum of a Weyl SM slab in a field. Weyl SMs are theoretically predicted to occur in strongly spin-orbit coupled systems like the iridates, certain spinels and topological insulator-ferromagnet multilayers[,, 7, 8], Yet, despite promising indications[4], there is currently no clearcut experimental candidate. However, two recently discovered materials Cd 3 As 2 [4, 5, ] and Na 3 i[6, 7, 9] are thought / 2 to be 3D Dirac SMs, close cousins of Weyl SMs. The bulk band-structure of these Dirac SMs consists of two superimposed copies of Weyl SMs with opposite chiralities. Ordinarily, when Weyl nodes of opposite chirality are not separated in momentum, they can mix and gap each other out. However, in Dirac SMs intermixing is symmetry forbidden, since the superimposed Weyl nodes belong to different representations of the crystal symmetry (namely, discrete screw-symmetries for Cd 3 As 2 and Na 3 i[6, 7, 9, ]). We show that the known Dirac SM materials can have pairs of surface arcs that meet at a sharp corner or kink at the bulk Dirac nodes (Fig. 3a). Such a kink would not be allowed in a purely 2D metal, and is a special feature of the crystal-symmetry-protected Weyl structure of the Dirac SM. This result is not a priori obvious, since the surfaces of interest do not preserve the symmetry that protects the bulk Dirac nodes. Despite this, we show that surface states and kink feature are perturbatively stable to the symmetry breaking potential of the surface, and can exist so long as this potential is not too strong. Applying the semiclassical results for the Weyl SM, we describe the signatures of these unconventional Dirac surface states in quantum oscillations experiments. Semiclassical Analysis - To start, let us consider the simplest case of a single pair of bulk Weyl nodes with chiralities ± located at k = ±K W ẑ and a magnetic field along the y-direction (the extension to more complicated cases is straightforward). In an infinite system, the magnetic field produces andau-level () bands that disperse only along the field direction. For k W l, where l = e is the magnetic length, the ±-chirality Weyl nodes are effectively decoupled, and the spectrum includes gapped, non-chiral bands with energies ε ± n (k y ) ±sgn(n)v 2l 2 + k2 y with n = ±, ±2,... and gapless chiral modes with energies ε ± (k y) = ±vk y, for the ±-chirality nodes respectively. Now consider a slab of Weyl semi-metal that is infinite in the x- and z- directions and with finite-thickness,, along y. Further, suppose that the slab is sufficiently thick to neglect direct tunneling between states in the center of the Fermi-arcs on the top and bottom surfaces. Initially we focus at low energies near the bulk Weyl node where the relevant states are those of the surface-fermi arc and the bulk chiral s. ater, we will see that the results extend to energies well above the Weyl node where the bulk consists of two Fermi-pockets connected at the surface by Fermi-arcs[3]. In a semiclassical description, an electron at z- momentum k z along the Fermi-arc of the top surface slides along the arc towards the - chirality Weyl node according to: t k = ev k = evˆt k () Here, we have taken the velocity, v, on the Fermi-arc to be independent of k, and ˆt k is the unit tangent vector to the arc (with orientation on top and bottom surfaces indicated by the arrows in Fig. a). As an electron sliding along the top-surface arc nears the - bulk Weyl node, the energy gap to bulk bands vanishes. This necessarily leads to breakdown in the single-band semiclassical description in which the electron is transferred from the surface arc into the bulk. At low energies, the only available bulk states are those of the gapless bulk chiral [] propagating towards the bottom surface[6]. This chiral mode acts as a one-way conveyor-belt, transporting the electron from the Fermi-arc on the top surface to that of the bottom surface. Upon reaching the bottom-surface Fermi-arc, the electron then slides to the + Weyl node, where it connects with the upwards moving chiral bulk, thereby returning to the top surface and completing the orbit (see Fig. c). Quantum energy levels can be approximately obtained from semiclassical orbits that satisfy the condition: ε n t 2π(n + γ) with n Z, where t is the semiclassical time associated with the orbit, and γ is a constant of order unity encoding low-n quantum effects. Sliding along the top and bottom Fermi-arcs takes time: t arc k ev where k is the arc-length of the Fermi-arc. Propagation between top and bottom surfaces via the bulk chiral s takes time t bulk v. Combining these expressions gives: ε n = πv(n + γ) + k l 2 (2) where zero-energy corresponds to the Weyl nodes. These magnetic orbits involving Fermi-arcs are distinguished from conventional magnetic orbits in ordinary 2D systems or in surface states of 3D systems by the dependence on the slab thickness,. As explained below, this characteristic dependence can be extracted by analyzing the dependence of quantum oscillations on field direction. Another peculiar and unconventional feature is that the real-space trajectory of these orbits need not enclose any area perpendicular to the magnetic field (as occurs when the Fermi-arcs are straight lines). Quantum Oscillations - Having established the existence of quantized magnetic orbits involving Fermi-arcs we now turn to the question of whether these orbits produce quantum oscillations. Suppose we fix chemical potential µ, and vary magnetic field. Eq. 2 dictates that the n th energy level crosses µ when: = ek n ( πv (n + γ) µ ) (3) where the solution is defined only for sufficiently large n such that the right-hand side is positive. States cross µ at regularly spaced intervals in of size Ω eπv µk. Each time a level passes through µ, a peak occurs in the density of states, giving rise to periodic-in- oscillations in many measurable quantities like conductivity 3 and magnetization. These oscillations are analogous to those of an ordinary 2D metal with quadratic dispersion with effective mass m eff = k πv (though, of course, the bulk Weyl electrons are massless and m eff is just an effective parameter with dimensions of mass). The periodic train of peaks persists only up to fields of order ( sat = k µ ) πv γ µ k πv γ where x denotes the smallest integer that exceeds x. For fields of order a few Tesla, l s of nm, whereas k is expected to be an atomic scale distance of order.å. Hence, quantum oscillations should be observable in slabs a few hundred nm, not too stringent a requirement. Another practical issue is that of impurities. Observation of coherent quantum oscillations requires electrons to complete a magnetic orbit before scattering off an impurity: ω c τ where ω c ev 2k and τ is the elastic scattering time. Together with the condition that sat this requires that the sample thickness not greatly exceed the mean-free path: l v τ. For sat the majority of the magnetic orbit takes place in the bulk, and the energy levels saturate to the field independent values: ε n ( sat ) πvn. Since, the bulk level structure of a thermodynamically thick slab cannot depend on particular choice of boundary conditions, to understand this result, it is useful to compare to a large system with periodic boundary conditions in y. There we expect two-sets of -independent energy modes associated with the ± bulk chiral s, each with quantized energies vk y,n = 2πn. The factor of two difference between the quantization scale periodic and open boundary conditions can be understood as follows: in the periodic boundary-condition case, the chiral s from the ± Weyl nodes are independent leading to a doubly degnerate tower of modes. In the finite slab, the ± chiral s are no longer separately quantized, since an electron propagating in the + Weyl nodes necessarily reflects into the counter-propagating chiral of the - Weyl node via a detour through the surface states. However, in the limit, such distinctions become unimportant. As essential ingredients for the existence of bulk chiral s in a thick but finite slab, these magnetic orbits must persist to all energies where the bulk chiral s are present. This expectation is indeed born out by numerical simulations (see below and App. C of [5]). Direction Dependence of Field So far we have considered field along the y-direction, normal to the surface. For generic field direction. The bulk chiral s propagate parallel to the field, and only the y-component of drives motion of k along the arc. Ignoring arc-curvature, one can then simply replace ŷ ˆ and k k in ŷ ˆ Eqs. 2,3. Notably, the field-scales of Eq. 3 extrapolate eπv γ k µ to the residual n = value:. The constant piece, e/k, encodes the deviation of the orbit from a purely 2D orbit and can be extracted by fitting n ŷ ˆ + ek E/v z k a) (x -3 ) k E/v z k.2. c) πve(n+γ/2πv)/)(k E n ) 2 (x 2 ) 2 b) k k l 2 / ~ / (x 2 ) FIG. 2. Energy levels with partial surface-bound state character, obtained from numerical solution of Eq. 32. (a) shows bare energy levels for parameters: v =.2v z, and l = 28k (corresponding to T for typical expected value of k.å ). (b) shows that n levels collapse to expected semiclassical form. Only the lowest energy level deviates from the expected semiclassical form, (the jaggedness of this line is a numerical artifact). (c) shows -dependence of energy-levels with k = 5. The levels cross (red s) a fixed reference energy (horizontal blue line), with nearly equal spacing for k l 2 k (corresponding to periodic-in-/ quantum oscillations), then stop crossing for k l 2 k. the angle or energy dependence. Deviations from Adiabaticity - In the above treatment, we assumed that electrons slide all the way to the end of the surface arc before transitioning into the bulk. A more careful analysis (see App. of [5]) shows that the electron jumps off the arc before reaching the end when its momentum is within l of the bulk Weyl node. This amounts to replacing k k αl in Eq. 2, where α is a numerical constant of order unity. This effect is negligible at low fields k l, and gives a fractional correction in the quantum oscillation period δω k l for high fields. The high-field stretching of δω is maximal near sat where δω. k Numerical Validation of Semiclassical Approximations - We validate the semiclassical treatment by directly obtaining the spectrum of a Weyl semi-metal slab in a magnetic field, using the simple model Hamiltonian: H = iv y σ y 8 v zk [ (2ˆπ z /k ) 2] σ z + v ˆπ x σ x (4) (see App. C of [5] for details). Here, σ are 2 2 Pauli matrices labeling two bulk bands, ˆπ = i ea, A = zŷ is the vector potential in the andau gauge correspond- 4 ing to a uniform magnetic field along ŷ, and we have introduced different velocities v z along z and v in the xy-plane for convenience. Representative results are shown in Fig. 2a as a function of slab-thickness. The curves collapse (Fig. 2b) to the predicted semi-classical form of Eq. 2. Fig. 2c shows the energy levels and their intercept with a line of fixed energy as a function of inverse-field. The crossings are regularly spaced for small fields, and saturate to - independent values at large fields. For moderate fields, we observe the predicted stretching of the -period, due to departures from adiabaticity. The good agreement between semiclassics and numerics validates the semiclassical approach, which we now extend to treat quantum oscillations from surface states in Dirac materials. Dirac Surface States - Consider the surface of a Dirac SM slab with normal along the y-direction. Such a surface breaks the crystal symmetry protecting the bulk Dirac nodes, but let us first ignore this effect. Then, there will be two sets of Fermi-arcs arising from the two copies of the bulk Weyl nodes, denoted R and R, that transform differently under crystal symmetry and generically curve in opposite directions. The surface arcs join at the bulk Weyl nodes without mixing leading to a sharp corner or kink in the shape of the surface-states Fermisurface (Fig. 3a). Such a kink would not be allowed in a purely 2D metal, and is a special feature of the crystalsymmetry-protected Weyl structure of the Dirac SM. Next, imagine adding back the crystal symmetrybreaking effects of the surface. The surface states are clearly stable to a weak crystal symmetry-breaking potential away from the Dirac nodes where the two surface arcs are separated in momentum. Interestingly, the perturbative protection extends all the way to the bulk Dirac node, since the surface wave-function becomes extended into the bulk near the bulk Dirac-points and is no longer affected by the surface (see App. D of [5]). Therefore, when the symmetry-breaking potential of the surface is not too strong, the surface arcs survive and their Fermisurface retains the unconventional kink -discontinuity. On the other hand, a sufficiently strong surface potential can reconstruct (Fig. 3b,c) or even entirely remove (Fig. 3d) the surface states. In the following section, we consider the case where the surface states are connected to the bulk Dirac-points (Fig. 3a or b), and ask whether these unconventional kinked Fermi-surfaces lead to quantum oscillations in a magnetic field. Quantum Oscillations from Dirac Surface States - For Cd 3 As 2 and Na 3 i, an applied magnetic field along any axis besides z breaks the discrete rotation symmetry protecting the Dirac nodes. Consequently, the bulk chiral s for the two sets of overlapping Weyl nodes are mixed by the field, and develop a gap Ce [ ( ˆ ] ẑ) 2, where C is a material parameter (see a) b) c) d) f) 2α ν(ε) k x (2) Ω - / mix k z / sat () Ω - / e) ν(ε) g) ' 2' 4 4' 2 l M 3' (2) Ω - 3 () Ω - y / mix / FIG. 3. Viewing the Dirac SM as two superposed copies of a Weyl SM with opposite chiralities suggests two sets of surface arcs, labeled R (blue) and R (red), that curve in opposite directions and meet at the bulk Weyl nodes with a discontinuous kink (a). Crystal symmetry breaking perturbations mix R and R (vertical dashed lines) and depending on their strength may either preserve- (a) reconstruct- (b,c) or remove- (d) the surface states. (e) Semiclassical orbits for Dirac semimetal with kinked surface states of type (a) (a similar picture holds for those shown in (b)) as two copies of the Weyl SM orbits that are mixed in the bulk do to the magnetic field. (f,g) Schematic representation of kinked surface-state (shown in a,b) contributions to the density of states in a field for sat mix (f) and sat mix (g). App. E of [5]). Henceforth, we will refer to this effect as RR -mixing. States with energies ε are unaffected by this gap, and the magnetic orbits proceed as two independent copies of the Weyl orbits. For ε , the RR -mixing can back-scatter electrons between segments 2 3 and 3 2 of the orbits in Fig. 3a, characterized by the length scale l M v 2. If the distance travelled through the bulk is much less than l M, i.e. ˆ ŷ l M, then the RR -mixing does not typically occur before the electron traverses the bulk. In this case, the mixing is ineffective and the magnetic orbits for each Weyl copy occur essentially independently. ˆ ŷ On the other hand, if l M, the electrons penetrate only distance l M into the bulk before returning to the same surface (but switching copies). Then, the orbits occur separately on each surface. The time to traverse such a semi-classical orbit is t 2k ev( ŷ) + 2l M () v where the second term accounts f
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks
SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!

x