36 1/2 ROUGH OPENING 1/4 MIN. 36 FRAME DIMENSION 34 DOOR OPENING 1 1 1/4 MAX /2 FRAME DIMENSION 118 ROUGH OPENING PDF

Please download to get full document.

View again

of 8
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information Report
Category:

Music

Published:

Views: 0 | Pages: 8

Extension: PDF | Download: 0

Share
Related documents
Description
6 /2 /4 MIN. 6 4 DOOR /4 MIN. NOTES:. THE PRODUCT SHOWN HEREIN IS DESIGNED AND MANUFACTURED TO COMPLY WITH REQUIREMENTS OF THE FLORIDA BUILDING CODE. INCLUDING THE HVHZ. 2. WOOD FRAMING AND MASONRY
Transcript
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d=.6 WAS USED FOR WOOD ANCHOR CALCULATIONS.. FRAME MATERIAL: ALUMINUM 606-T5. 2. UNITS MUST BE GLAZED PER ASTM E00-04/09, SEE SHEET 2 FOR DETAILS.. APPROVED IMPACT PROTECTIVE SYSTEM IS REQUIRED FOR THIS PRODUCT IN WIND BORNE DEBRIS REGIONS. 4. FOR ANCHORING THROUGH FRAME INTO WOOD FRAMING OR 2X BUCK USE #0 WOOD SCREWS WITH SUFFICIENT LENGTH TO ACHIEVE A /4 MINIMUM INTO SUBSTRATE. LOCATE ANCHORS AS SHOWN IN ELEVATIONS AND INSTALLATION DETAILS. 5. FOR ANCHORING THROUGH FRAME INTO MASONRY/CONCRETE USE /6 TAPCONS WITH SUFFICIENT LENGTH TO ACHIEVE A -/4 MINIMUM INTO SUBSTRATE WITH 2-/2 MINIMUM EDGE DISTANCE. LOCATE ANCHORS AS SHOWN IN ELEVATIONS AND INSTALLATION DETAILS 6. FOR ANCHORING THROUGH FRAME INTO METAL STRUCTURE USE /6 SMS OR SELF DRILLING SCREWS WITH SUFFICIENT LENGTH TO ACHIEVE THREADS MINIMUM BEYOND STRUCTURE INTERIOR WALL. LOCATE ANCHORS AS SHOWN IN ELEVATIONS AND INSTALLATION DETAILS. 7. ALL FASTENERS TO BE CORROSION RESISTANT. 8. INSTALLATION ANCHORS SHALL BE INSTALLED IN ACCORDANCE WITH ANCHOR MANUFACTURES INSTALLATION INSTRUCTIONS AND ANCHORS SHALL NOT BE USED IN SUBSTRATES WITH STRENGTHS LESS THAN THE MINIMUM STRENGTH SPECIFIED BELOW A. WOOD: MINIMUM COMPRESSIVE STRENGTH OF 2,000 PSI. B. CONCRETE: MINIMUM COMPRESSIVE STRENGTH OF 2,000 PSI. C. MASONRY: HOLLOW/FILLED BLOCK PER ASTM C90 WITH Fm = 2,000 PSI MINIMUM. D. METAL STRUCTURE: STEEL 8 GA. (.048 ) FY = KSI/FU = 52KSI OR ALUMINUM 606 -T5 FU = 0KSI.048 THICK MINIMUM. 9. PERIMETER AND JOINT SEALANT TO BE DESIGNED IN ACCORDANCE WITH ASTM E22 8 /4 MAX. 7 /2 . 6 .2 BUTT HINGE 6 4 O.C. MAX 6 MAX /6 7 /8 THE SERIES D900 IS A HIGH PERFORMANCE TERRACE DOOR FOR USE IN CONDOMINIUMS, LOFTS, HOTELS, AND HIGH-RISE APARTMENTS WITH ALL THE BENEFITS YOU ARE LOOKING FOR IN A FRENCH DOOR LOOK. THE SERIES D900 TERRACE DOOR WILL WITHSTAND HEAVY TRAFFIC AND THE WORSE OF WEATHER CONDITIONS WHILE MAINTAINING IT'S ELEGANT STYLING. THE 2-/4 (57.2) THICK DOOR WITH A X 4-/2 (25 X 4.) FRAME FEATURES DOUBLE POLYAMIDE STRIPS PROVIDING SUPERIOR INTERIOR TO EXTERIOR THERMAL SEPARATION. FOR MAXIMUM SECURITY, THE SERIES D900 TERRACE DOOR INCLUDES FIVE-POINT LOCKING DEVICE FOR SINGLES. FIVE KNUCKLES HINGES WITH NON- REMOVABLE STAINLESS STEEL PINS PER LEAF COMPLETE THE STURDY LOOK AND FEEL OF THE SERIES D900 TERRACE DOOR. FINISH: *CLEAR ANODIC COATING *DARK BRONZE ANODIC COATING *BLACK ANODIC COATING *CUSTOM PAINT 4 HINGE FOR ALL DOORS /4 MAX. 6 MAX 2.2 Date: Scale: 04/27/7 AS NOTED CRL - US ALUMINUM DOOR - SERIES D900 - OUT-SWING /2 ='-0 . /2 MIN. EDGE DISTANCE Revisions By: WOOD FRAMING OR 2X BUCK /4 MIN. DOOR DIMENSION /6 HT450 FASTENER NOT BY CRL / US ALUMINUM (TYP) #0 WOOD SCREW.090 SENTRYGLAS OUT-SWING HEAD DOOR DIMENSION /6 .090 SENTRYGLAS SETTING BLOCK SB222 HT45 /6 WOOD FRAMING OR 2X BUCK /4 MAX. WEEP HOLE COVER /4 MIN. /2 MIN. EDGE DISTANCE 2 OUT-SWING SILL (WOOD SUBSTRATE) #0 WOOD SCREW MAX. SPACING 4 O.C. Date: 04/27/7 Scale: AS NOTED CRL-US ALUMINUM - DOOR - SERIES D900 - OUT-SWING DETAILS - WOOD FRAME.2 WOOD FRAMING OR 2X BUCK #0 WOOD SCREW /2 MIN. EDGE DISTANCE /6 .090 SENTRY.090 SENTRY /6 /2 MIN. EDGE DISTANCE WOOD FRAMING OR 2X BUCK #0 WOOD SCREW /4 MIN. /6 TEMP /6 TEMP TH70 /4 MIN. SHOP SEALED (ACRYL-R) UNDER ALL BUTT HINGES BUTT HINGE DOOR DIMENSION DOOR DIMENSION OUT-SWING JAMB WITH STANDARD 5 KNUCKLE HINGE 5 OUT-SWING JAMB Date: Scale: 04/27/7 AS NOTED CRL-US ALUMINUM - DOOR - SERIES D900 - OUT-SWING DETAILS - WOOD FRAME. /4 MIN. EDGE DISTANCE Revisions By: METAL STURCTURE DOOR DIMENSION /6 HT450 FASTENER NOT BY CRL / US ALUMINUM (TYP) #0 SMS OR SELF DRILLING.090 SENTRYGLAS OUT-SWING HEAD DOOR DIMENSION /6 .090 SENTRYGLAS SETTING BLOCK SB222 HT45 /6 5/8 MIN. (TYP.) /4 MAX. WEEP HOLE COVER /4 MIN. EDGE DISTANCE 2 OUT-SWING SILL METAL STURCTURE #0 SMS OR SELF DRILLING Date: 04/27/7 Scale: AS NOTED CRL-US ALUMINUM - DOOR - SERIES D900 - OUT-SWING DETAILS - STEEL FRAME.4 #0 SMS OR SELF DRILLING /4 MIN. EDGE DISTANCE /6 .090 SENTRY.090 SENTRY /6 /4 MIN. EDGE DISTANCE #0 SMS OR SELF DRILLING METAL STURCTURE METAL STURCTURE /6 TEMP /6 TEMP TH70 SHOP SEALED (ACRYL-R) UNDER ALL BUTT HINGES BUTT HINGE DOOR DIMENSION DOOR DIMENSION OUT-SWING JAMB WITH STANDARD 5 KNUCKLE HINGE 5 OUT-SWING JAMB Date: Scale: 04/27/7 AS NOTED CRL-US ALUMINUM - DOOR - SERIES D900 - OUT-SWING DETAILS - STEEL FRAME.5 2-/2 MIN. EDGE DISTANCE Revisions By: -/4 MIN. DOOR DIMENSION HT450 CONCRETE / MASONRY OPTIONAL X BUCK SEE NOTE -7 / SHEET FASTENER NOT BY CRL / US ALUMINUM (TYP) /6 TAPCON /6 .090 SENTRYGLAS OUT-SWING HEAD DOOR DIMENSION /6 .090 SENTRYGLAS SETTING BLOCK SB222 HT45 /6 /4 MAX. OPTIONALX BUCK SEE NOTE -7 / SHEET 2-/2 MIN. EDGE DISTANCE 2 -/4 MIN. OUT-SWING SILL CONCRETE / MASONRY /6 TAPCON Date: 04/27/7 Scale: AS NOTED CRL-US ALUMINUM - DOOR - SERIES D900 - OUT-SWING DETAILS - CONCRETE FRAME.6 OPTIONAL X BUCK SEE NOTE -7 / SHEET CONCRETE / MASONRY /6 TAPCON MAX. SPACING 4 O.C. MIN. 6 FROM EDGE /6 .090 SENTRY.090 SENTRY /6 OPTIONAL X BUCK SEE NOTE -7 / SHEET CONCRETE / MASONRY /6 TAPCON MAX. SPACING 4 O.C. MIN. 6 FROM EDGE 2-/2 MIN. EDGE DISTANCE -/4 MIN. SHOP SEALED (ACRYL-R) UNDER ALL BUTT HINGES BUTT HINGE /6 TEMP /6 TEMP TH70 -/4 MIN. 2-/2 MIN. EDGE DISTANCE DOOR DIMENSION DOOR DIMENSION OUT-SWING JAMB WITH STANDARD 5 KNUCKLE HINGE 5 OUT-SWING JAMB CRL-US ALUMINUM - DOOR - SERIES D900 - OUT-SWING DETAILS - CONCRETE FRAME Date: 04/27/7 Scale: AS NOTED.7 2 /6 7/8 5 /8 5 /6 4 /4 8 /4 8 7/6 8 /4 /8 /4 /8 2 /6 HANDLE - MANOR 2 HANDLE - HERITAGE HANDLE - ESTATE CRL-US ALUMINUM - DOOR - SERIES D900 - HANDLE OPTIONS FINISH Date: Scale: 04/27/7 AS NOTED STYLE POLISHED BRASS ANTIQUE BRASS POLISHED CHROME SATIN NICKEL ANTIQUE NICKEL BRUSHED CHROME OIL RUBBED RUSTIC UMBER WHITE MATTE BLACK MANOR HERITAGE ESTATE 2.
Recommended
View more...
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks
SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!

x