20 Minute Rated Particleboard (PC5-20PP) Bonded Particleboard Core, 5-Ply Construction, Cat. A, PP

Please download to get full document.

View again

of 7
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information Report
Category:

Spiritual

Published:

Views: 0 | Pages: 7

Extension: PDF | Download: 0

Share
Related documents
Description
20 Minute Rated Particleboard (PC5-20PP) Bonded Particleboard Core, 5-Ply Construction, Cat. A, PP (Fire Test Standards IBC, UL-10C, CAN/ULC S104, & NFPA 252) Single Swing Pair or Double Egress Core Type
Transcript
20 Minute Rated Particleboard (PC5-20PP) Bonded Particleboard Core, 5-Ply Construction, Cat. A, PP (Fire Test Standards IBC, UL-10C, CAN/ULC S104, & NFPA 252) Single Swing Pair or Double Egress Core Type & Standards Particleboard : ANSI A grade LD-1 (32 lb/ft 3 ) Complies with CARB Phase I & II Emission Standards Maximum Sizes 4 3 x x 9 0 Protection Plates Up to 48 (above bottom of door) Door Thickness 1-3/4 (+/- 1/16 ) WDMA Prefit Tolerance Width: (+/- 1/32 ) Height & Thickness: (+/- 1/16 ) Weight 5.30lb/ft 2 (3070 Door = 111lbs) (4070 Door = 148lbs) Crossband High Density FSC Fiberboard Blocking (Standard) 5 top rail; 1 Bottom Rail; 1 Fixed Internal Stiles (Additional blocking upon request) Assembly Adhesive Face: Type I (waterproof); Core: Type II (water-resistant) Replaceable Edge Stiles & Covers Field Replaceable SCL Stiles. Acrovyn and/or 20GA #4 finish Stainless Steel Replaceable Covers Replaceable Edge Profile Beveled, Square Lites 5 from edges, 1-1/2 from hardware or additional cutouts Max Visible Glass Area 1296 in 2 Lite Frames Wood beads; Metal Painted, Wood Veneered, Acrovyn Wrapped Glazing Any listed & labeled (20min or greater) Louvers Not Available Electronic Options Electronic hardware & raceways Available Hinges Per NFPA 80 Table Points of Latching Singles = 1pt Pairs & DE w/ No Hose Stream = 2pts Double Egress w/ Hose Stream = 4pts Pivots Offset w/intermediate (Center hung not allowed) Locks Mortise & Cylindrical (Max 5 Backset) Exit Devices Surface Vertical Rod (Includes LBR), RIM & Mortised Concealed Vertical Rod Not Available (Must use SCL core) Flushbolts Must Be Extension Type (Metal Door) Closing Devices Mortised or Surface Mounted Door Bottoms Mortised or Surface Mounted Transoms Available Max opening size 4 x 9 (Alternate) Standard Features & Benefits Overview of Acrovyn Door Systems Acrovyn Doors will not tear, chip, or crack. Key to the doors durability is the rugged Acrovyn face and edge material. Acrovyn is 5 times as abrasion resistant as wood and twice as resistant as HPL. Integrated Acrovyn or stainless steel radiused edge guards wrap around both door stiles to provide the ultimate damage protection If ever damaged, the Acrovyn Door s edge guards & stiles can be easily replaced in the field for a longer door life.* Contains no PBT s & is completely free of PVC Standard line of Acrovyn Doors are C2C certified at the Silver level Standard Construction Acrovyn Face & Edge Finish Options 20 standard woodgrain & 2 metal Chameleon Acrovyn finishes available in a smooth suede texture 67 standard Acrovyn solid colors Stainless steel edges available in 20Ga type 304, #4 finish Technical Data Standards: WDMA I.S.1-A Extra Heavy Duty Door Lites & Louvers: Cutouts, vision kits, glazing, and louvers available* Pre-machining available for all mortise hardware from manufacturer s templates & approved shop drawings Warranty: Limited Lifetime Top & bottom rails are factory sealed with an approved sealant. U.S. Patents: 7,621,102; 7,587,876; 7,775,013-B2; 7,886,501-B2. U.S. Design Patents: D S; D S; D S; D S; D S *As noted on the individual product data sheets - 4 - Performance Attributes All Door Products* Cycle Slam: Extra Heavy Duty per WDMA TM-7, -2,000,000 cycles (2x the WDMA requirement) Hinge Loading: Extra Heavy Duty per WDMA TM-8 Screw Holding: Extra Heavy Duty per WDMA TM-10 Door Finish Wear Index: ASTM D (Abrasion Resistance Testing) Door Finish Chemical Resistance Testing: ASTM D Door Finish Impact Resistance: ASTM D-4226 Warp Tolerance: WDMA TM-2 Stain Resistance/Cleanability: ASTM D (Common Stains Easily Removed) Resistance to Fungi: ASTM G Zero Fungal Growth (On Acrovyn Sheet) Resistance to Bacteria: ASTM G Zero Bacterial Growth (On Acrovyn Sheet) Resistance to Fungi: ASTM G Zero Fungal Growth (At Replaceable Edge Seam) Resistance to Bacteria: ASTM G Zero Bacterial Growth (At Replaceable Edge Seam) WDMA I.S.1A Flush Wood Door Minimum Performance Standards Performance Attribute Performance Duty Level Extra Heavy Duty Heavy Duty Standard Duty Adhesive Bond Durability, WDMA TM-6 Type I or Type II Type I or Type II Type I or Type II Cycle Slam, WDMA TM-7 1,000,000 cycles 500,000 cycles 250,000 cycles Hinge-Loading, WDMA TM lbs. (2440 N) 475 lbs. (4110 N) 400 lbs. (1780 N) Door Finishes Various ASTM test methods Screwholding, WDMA TM-10 Door Face (Blocked or unblocked) Vertical Door Edge Horizontal Door Edge Telegraph, Section T-1 Warp Tolerance, Section T-2 Squareness, Section T-3 TR-6/OP-6 or equal ** TR-4/OP-4 or equal ** TR-2/OP-2 or equal ** 550 lbs. (2440 N) 550 lbs. (2440 N) 300 lbs. (1330 N) 475 lbs. (2110 N) 475 lbs. (2110 N) 240 lbs. (1060 N) 400 lbs. (1780 N)*** 400 lbs. (1780 N) 180 lbs. (810 N) Maximum inch in any 3 inch span (0.25 mm in any 76 mm span) Maximum 0.25 inch in any 3-6 x 7-0 (6.4 mm in any 1050 mm x 2100 mm) door section Diagonal variance 1/8 inch (3.2 mm) * Acrovyn Door model FC5-NR, meets Extra Heavy Duty for all sections above with the exception of Screwholding WDMA TM-10 (unblocked) ** Other formulations may exhibit similar performance characteristics, but must meet or exceed the performance levels for the systems specified to be considered as equal. *** If screw holding power is less than 400 lbs. (1780 N) in a Standard Duty door, blocking or thru-bolts are recommended for operable hardware LEED v4 Contributions Building Product Disclosure and Optimization Credits Environment al Product Declarations Raw Materials FSC/POST/PRE Recycled Content Material Ingredients (3 rd party certification) Regional Priority (manuf 100 miles away) Indoor Environmental Quality Credits Low Emitting Materials (ULEF & NAF) Emissions And Content (nonemitting) Non-Rated Agrifiber C2C Silver NO/0%/56% C2C Silver NO YES YES Non-Rated SCL C2C Silver NO/0%/0% C2C Silver NO YES YES Non-Rated FSC-PB C2C Silver YES/0%/100% C2C Silver NO YES YES Non-Rated PB C2C Silver NO/0%/58% C2C Silver NO YES YES Non-Rated SCL-STC30 C2C Silver NO/0%/0% C2C Silver NO YES YES Non-Rated SCL-STC43-46 C2C Silver NO/0%/0% C2C Silver NO YES YES 20min Agrifiber C2C Silver NO/0%/0% C2C Silver NO YES YES 20min SCL C2C Silver NO/0%/36% C2C Silver NO YES YES 20min FSC-PB C2C Silver Yes/0%/0% C2C Silver NO YES YES 20min PB C2C Silver No/0%/36% C2C Silver NO YES YES 45min Mineral C2C Silver NO/0%/36% C2C Silver NO YES YES 60min Mineral C2C Silver NO/0%/36% C2C Silver NO YES YES 90min Mineral C2C Silver NO/0%/36% C2C Silver NO YES YES Lead Lined NR Agrifiber N/A NO/0%/0% N/A NO YES YES Lead Lined NR SCL N/A NO/0%/0% N/A NO YES YES Lead Lined NR FSC-PB N/A YES/0%/56% N/A NO YES YES Lead Lined NR PB N/A NO/0%/0% N/A NO YES YES Lead Lined 20min FSC-PB N/A YES/0%/56% N/A NO YES YES Lead Lined 20min PB N/A NO/0%/56% N/A NO YES YES The U.S. Green Building Council's LEED green building program is the preeminent program for the design, construction, maintenance and operations of high-performance green buildings. Learn more at usgbc.org/ LEED LEED 2009 v3.0 Contributions MR 4 Recycled Content Materials & Resources Credits MR6 Rapidly Renewable MR 7 Certified Wood Indoor Environmental Quality Credits IEQ 4.4 No added Urea Formaldehyde Non-Rated Agrifiber X X X X Non-Rated SCL X X Non-Rated FSC-PB X X X Non-Rated PB X X Non-Rated SCL-STC30 X X Non-Rated SCL-STC min Agrifiber X X X X 20min SCL X X 20min FSC-PB X X X 20min PB X X 45min Mineral 60min Mineral 90min Mineral X X X Lead Lined NR Agrifiber X X X X Lead Lined NR SCL X X Lead Lined NR FSC-PB X X X Lead Lined NR PB X X Lead Lined 20min FSC-PB X X X Lead Lined 20min PB X X The U.S. Green Building Council's LEED green building program is the preeminent program for the design, construction, maintenance and operations of high-performance green buildings. Learn more at usgbc.org/ LEED Lite Kit Options Flush Fire-Rated Wood Bead Lipped Non-Rated Wood Bead Flush *Max Glass Thickness = 5/16 *Max Glass Thickness = 5/16 Lipped Installation of metal channel, mitering and installation of wood bead must be done at the time of glass installation Standard Metal Lite Kit (NR 90min) Painted Wood Veneered Acrovyn Wrapped ALL DIMENSIONS NOTED ARE NOMINAL - 8 - Door Edge Options
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks
SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!

x